Fresh Motor Break in??

Old 03-19-2010, 07:31 PM
  #1  
dynaguy03
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Feb 2008
Location: New Jersey
Posts: 133
Default Fresh Motor Break in??

Hello All

So this is my first motor that i had freshened up and am NOT putting it on a dyno before i go out.
This motor has new rings, cam, valve springs, lifters main brgs
Should i use one of the numerous break in oils? Is there some procedure i should follow?

Thanks
Keith.
dynaguy03 is offline  
Old 03-20-2010, 03:23 AM
  #2  
johnracer
Senior Member
DYNO OPERATOR
 
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
Default

I've always run the same oil I intend to run after break-in. Fire it up, turn the idle up to around 2500 and let it run for about 20 minutes. Check for leaks, check the timing, adjust idle speed & mix, check and adjust valves, take it to the track and let it fly! No easy "break-in" passes. It'll break in better if you just run it full out......I'd change the oil & filter after the first day at the track and maybe cut the filter apart to inspect. Some will change the oil after the initial run-in. It's really a preference thing. JMO
Johnny
johnracer is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service