Getting the Air out of rear Wilwood Brakes

Old 02-15-2010, 07:24 PM
  #1  
robert_ea
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2003
Posts: 1
Default Getting the Air out of rear Wilwood Brakes

I just finished my new race car and have an issue with air in the rear brakes. New Wilwood master cylinder, Wilwood rear brakes from my wrecked race car, all new steel lines except for steel braided to connect rear housing line to body line, and minimum number of joints. I had to use banjo fittings because the tight spacing between strut tower and master cylinder. I've worked on this problem for 2 weeks with no luck. All lines are lower that the master cylinder and wheel cylinders are lower than master cylinder. The odd thing is that the front brakes work great and have no air in them. PLEASE HELP!
robert_ea is offline  
Old 02-15-2010, 07:46 PM
  #2  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

Don't know for sure but, but on a corvette (i know not related) but the easiest way to get all the air out is gravity feed, since all the lines are below the master cylinder, take the top off the master cylinder and open the rear wheel cylinders and let it sit overnite, or keep an eye on it to make sure the master cylinder stays full.
Just a thought.

Zip.
zipper06 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service