MSD Digital 7. P/N 7530T

Old 01-23-2010, 11:46 AM
  #1  
chevyfireball
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Dec 2005
Location: Napier, New Zealand
Posts: 230
Default MSD Digital 7. P/N 7530T

My car came with a 7530T MSD which is the one NHRA specified Pro Stock cars must use because it has Traction Control Detection.

I plugged in my laptop to the MSD and the Monitors are showing:
TCD: 00:00
PTS: 00:00
RST: 18:20 (and its counting down)

The help file says this is counting down from 24:00 to 00:00 showing the last time the ignition was reset by the Crew Chief. (who needs a special key...Beats Me)!
I don't think its effecting my ignition but I don't know. Is this just a monitor that won't effect anything?I know if Traction Control is detected, the engine may be limited to 4000rpm until the ignition is reset or the TCD counts down to 00:00
Why anyone would put this ignition in a Top Sportsman style car I will never understand.

_________________
chevyfireball is offline  
Old 01-23-2010, 01:48 PM
  #2  
gnsrule
Senior Member
SENIOR BUILDER
 
Join Date: Nov 2004
Posts: 118
Default

http://www.msdignition.com/uploadedF...structions.pdf


The PN 7530T Ignition incorporates a unique Traction Control Detection (TCD) circuit. This software code monitors the magnetic pickup circuit for changes that would only come from an installed traction control device that would modify the signal from the mag pickup. If a modification is sensed in this circuit an Alert will be set and the status LED will flash a Code 4. This Alert will continue to flash until the ignition is kept turned On for 24 hours in order to reset. A 4000 rpm TCD Rev Limit is activated until the 24 hour TCD timer is elapsed or reset by an NHRA official.
gnsrule is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service