INTAKE MANIFOLD

Old 01-23-2010, 05:18 AM
  #1  
JEFF69Z28
Senior Member
DYNO OPERATOR
Thread Starter
 
Join Date: Apr 2008
Posts: 496
Default INTAKE MANIFOLD

DOES ANY MANUFACTURE HAVE AN ADVANTAGE OVER ANOTHER,I HAVE A SUPER VICTOR PORT MATCHED ON MY SBC,WILL DART OR ANY OTHER MAKE MORE HP?
JEFF69Z28 is offline  
Old 01-23-2010, 06:19 AM
  #2  
JimmySmith
Senior Member
MASTER BUILDER
 
Join Date: Jan 2007
Location: Batesville Ms.
Posts: 167
Default manifolds

Give us some specifics on engine ,car ,shift rpm and mabe someone can help. Also intended use Later J.Smith 4621 racing
JimmySmith is offline  
Old 01-23-2010, 06:22 AM
  #3  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

need more info ..

but can say the super victor did not impress me on any sb I ran it on.
hammertime is offline  
Old 01-23-2010, 09:25 AM
  #4  
JEFF69Z28
Senior Member
DYNO OPERATOR
Thread Starter
 
Join Date: Apr 2008
Posts: 496
Default Re: manifolds

Originally Posted by JimmySmith
Give us some specifics on engine ,car ,shift rpm and mabe someone can help. Also intended use Later J.Smith 4621 racing
406,SOLID ROLLER CAM,850 HOLLEY,8 INCH CONVERTER,4.56 GEAR,86 SS MONTE CARLO,SHIFT AT 7100 RPM,GO THRU TRAP AT 7100 RPM 128 MPH.
JEFF69Z28 is offline  
Old 01-24-2010, 06:59 AM
  #5  
JimmySmith
Senior Member
MASTER BUILDER
 
Join Date: Jan 2007
Location: Batesville Ms.
Posts: 167
Default intake manifold

My car 3200 lbs 360 mtr 220 heads, PG 5800 conv. , 5.38 gear, 31 tire runs .03-.04 quicker in 1/8 with a Holley 300-2 over a Vic Jr. never did compare on 1/4 my cam is [email protected] shift @6800 . Later J.Smith 4621 racing
JimmySmith is offline  
Old 01-25-2010, 07:16 AM
  #6  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default Re: manifolds

Originally Posted by JEFF69Z28
Originally Posted by JimmySmith
Give us some specifics on engine ,car ,shift rpm and mabe someone can help. Also intended use Later J.Smith 4621 racing
406,SOLID ROLLER CAM,850 HOLLEY,8 INCH CONVERTER,4.56 GEAR,86 SS MONTE CARLO,SHIFT AT 7100 RPM,GO THRU TRAP AT 7100 RPM 128 MPH.
On my 383 and 434 the super victor was very slowed compared to everything else (including a ported Dart Wilson and a cheap Pro Products)
hammertime is offline  
Old 01-25-2010, 07:23 AM
  #7  
andybyrd
Senior Member
MASTER BUILDER
 
Join Date: Mar 2009
Posts: 151
Default

My 2 Cents -- I ran a super victor on my SBC 434 and A Dart with a Holley H/P 950 6.10 in the 1/8 super victor 6.09 yesterday with the Dart but the Dart is straight out of the box the Super victor was ported and had a lot of pollish work done on it. I think If money is no object buy both work both test them both then sell the one you don't want Here on RJ, If money is tight then I would buy the Super victor it is probably the best intake out there for it's price, thats just the way I see it hope it helps. be safe
Andy
andybyrd is offline  
Old 01-25-2010, 11:20 AM
  #8  
curtisreed
Senior Member
RACING JUNKIE
 
curtisreed's Avatar
 
Join Date: Feb 2004
Location: KIEFER, OK.
Posts: 1,311
Default Re: intake manifold

Originally Posted by JimmySmith
My car 3200 lbs 360 mtr 220 heads, PG 5800 conv. , 5.38 gear, 31 tire runs .03-.04 quicker in 1/8 with a Holley 300-2 over a Vic Jr. never did compare on 1/4 my cam is [email protected] shift @6800 . Later J.Smith 4621 racing
Is this a stick shift car?

Curtis
curtisreed is offline  
Old 01-27-2010, 12:03 PM
  #9  
jmarksdragster
Senior Member
RACING JUNKIE
 
jmarksdragster's Avatar
 
Join Date: Jul 2007
Location: Florida
Posts: 635
Default

You didn't say what heads, that will make a difference. On anything roughly 200cc and smaller any of the larger intakes will be OK unless the heads are significantly worked over. For larger heads or well ported heads any intake can benefit from some work.
jmarksdragster is offline  
Old 01-28-2010, 05:52 AM
  #10  
JEFF69Z28
Senior Member
DYNO OPERATOR
Thread Starter
 
Join Date: Apr 2008
Posts: 496
Default

Originally Posted by jmarksdragster
You didn't say what heads, that will make a difference. On anything roughly 200cc and smaller any of the larger intakes will be OK unless the heads are significantly worked over. For larger heads or well ported heads any intake can benefit from some work.
AFR 210 FULLY CNC
JEFF69Z28 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service