Swapping from mineral to synthetic oil

Old 01-05-2010, 02:23 PM
  #1  
prozb
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2009
Posts: 4
Default Swapping from mineral to synthetic oil

Has anyone swapped from a 50 weight mineral oil to a 40 weight synthetic and seen any performance gains? I will be swapping from a 15w50 mineral to a 10w40 synthetic in my 582 BBC. Just thought i would ask the question, i have always used a 50 weight mineral in all my engines and have been told numerous times to switch to the synthetic for the frictional benefit and free HP gain. Was told around 10-15 at 7500rpm was typical.
prozb is offline  
Old 01-05-2010, 04:07 PM
  #2  
TheYellaBrick
Senior Member
RACING JUNKIE
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

We use REDLINE front to rear as we are dealing with MAJOR heat buildup when it's 100+ degrees out and the engine is spinning 6,000+ for 50 to 100 miles.
As an example of reduced friction, way back when I was into aircooled VW's and living in Denver, I filled up the transaxle with AMZOIL in the fall and as the temps dropped, I would experience only a 20 RPM drop after I'd start the engine and put it in neutral and let the clutch out. With mineral gearlube I would get a 1,000 RPM drop. :shock:
TheYellaBrick is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service