Need some Help with a windage tray

Old 11-23-2009, 10:23 AM
  #1  
jrsmith80
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2009
Posts: 7
Default Need some Help with a windage tray

I am assembling my short block and am having trouble figuring out where each stud goes to mount my Moroso Louvered Windage Tray. I lost the instructions and need to know which holes the tray mounts with. I got a ARP stud kit and it sure seems like I am missing a stud but ARP tells me that I am not. I know this sounds stupid but I need some help cuz my windage tray is in a different motor about 100 miles away. Thanks in advance.

Here is the windage tray I have:

http://www.summitracing.com/parts/MOR-23020/

And here is the stud kit that I am using:

http://www.summitracing.com/parts/ARP-234-5601/
jrsmith80 is offline  
Old 11-23-2009, 02:21 PM
  #2  
fla1976
Senior Member
RACING JUNKIE
 
fla1976's Avatar
 
Join Date: Aug 2007
Posts: 1,534
Default

Call the tech line listed on this site:
http://www.moroso.com/support/tech_support.asp
fla1976 is offline  
Old 11-23-2009, 02:46 PM
  #3  
jrsmith80
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2009
Posts: 7
Default

Originally Posted by fla1976
Call the tech line listed on this site:
http://www.moroso.com/support/tech_support.asp
I got it figured out, apparently ARP only sends out 5 studs with standoffs in their stud kit, which in turn will not work with the windage tray that I have. Kind of a joke, but I was told by a lady that if I needed another bolt then I would have to purchase one. It would be noice if that was stated in the description when ordering.
jrsmith80 is offline  
Old 11-23-2009, 06:09 PM
  #4  
kwkracing
Senior Member
RACING JUNKIE
 
Join Date: Dec 2004
Location: austin texas
Posts: 729
Default

The last hole in the windage tray uses the oil pump stud or bolt and not one of the long studs that would have came with a arp stud kit???
kwkracing is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service