Mopar stage 6 heads

Old 11-18-2009, 06:14 PM
  #1  
str
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2008
Posts: 1
Default Mopar stage 6 heads

whats wrong with the stage 6 Mopar heads and how well do they flow
str is offline  
Old 11-18-2009, 10:13 PM
  #2  
cepx111
Senior Member
RACING JUNKIE
 
Join Date: May 2006
Posts: 2,044
Default Re: Mopar stage 6 heads

Originally Posted by str
whats wrong with the stage 6 Mopar heads
They're mopar....... :shock: :lol:
cepx111 is offline  
Old 11-18-2009, 10:16 PM
  #3  
DirkaDirka
Senior Member
RACING JUNKIE
 
DirkaDirka's Avatar
 
Join Date: Jul 2009
Location: Clarksville, TN
Posts: 1,954
Default

X2 Should have gone with Ford.



j/k Mopar1968 is the Mopar guy here.
DirkaDirka is offline  
Old 11-20-2009, 06:50 AM
  #4  
TheYellaBrick
Senior Member
RACING JUNKIE
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

Dennis, I'm presuming the 'nut' in your signature refers to the 'Jesus nut'...oops, sorry about the side track, str! I'm also Mopar but not knowledgable of the Stage 6 heads....
TheYellaBrick is offline  
Old 11-20-2009, 07:12 PM
  #5  
mopar1968
Senior Member
RACING JUNKIE
 
mopar1968's Avatar
 
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,579
Default

Nothing wrong with them they flow very well,Big block's love them :!: :!: These Ford guy's don't know what a great engine really is :!: :!: :lol: :lol:


''JUST MY TWO CENT'S WORTH''
mopar1968 is offline  
Old 11-29-2009, 05:48 AM
  #6  
Pwmax
Senior Member
MASTER BUILDER
 
Join Date: Jul 2006
Posts: 184
Default

They are over looked heads, and make good power. The 2 problems with them is that new they are way over priced, so, not many people swing for them, considering Edelbrock Rpm's are about $300 a set cheaper, ready to bolt on, vs bare heads that need to be set up. Thats one. The other one is that years ago, before they switched places that cast them for mopar, there were a lot of issues with them, with cracking, leaking, and bad machining. Otherwise, they can really make good power.

I had a guy who had them already, new in boxes, that he payed like $1650 for, sell them for $900, bought 440 Source junk, and had me port the 440source heads. I tried like crazy to talk him out of doing that, but, he "heard" on the internet, that the stage 6 heads were junk. Thats funny. He sold a WAY better set of heads for a $750 hit, to buy butter soft, stolen versions of Edelbrock heads.

I have done numerous sets, the non-max wedge standard version stage 6's, fully ported to max wedge size, 2.19 intakes, will flow right around 340cfm, and make 750+hp without much trouble. the max wedge versions, that are cast to start with the max opening, and different chamber, will flow a bit better, and can make 800hp.

Frank
Pwmax is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service