TH350 AND BBC

Old 09-19-2009, 07:22 AM
  #1  
jreiley
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Aug 2007
Location: Iowa - USA
Posts: 218
Default TH350 AND BBC

Will a th350 bolt up to a bbc?
jreiley is offline  
Old 09-19-2009, 07:35 AM
  #2  
fla1976
Senior Member
RACING JUNKIE
 
fla1976's Avatar
 
Join Date: Aug 2007
Posts: 1,533
Default 350

If it has the Chevrolet bolt pattern.
There were TH350s in Buick, Olds and Pontiac., but the bolt pattern is different.
If it was behind a small block Chevy it will fit the BBC.
fla1976 is offline  
Old 09-19-2009, 12:28 PM
  #3  
jreiley
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Aug 2007
Location: Iowa - USA
Posts: 218
Default

That's good to hear. It was on a sbc. Save's me some bucks, for awhile.
jreiley is offline  
Old 09-19-2009, 05:09 PM
  #4  
chevyfireball
Senior Member
MASTER BUILDER
 
Join Date: Dec 2005
Location: Napier, New Zealand
Posts: 230
Default

I'd be looking for a TH400 in the meantime.
chevyfireball is offline  
Old 09-19-2009, 05:47 PM
  #5  
fla1976
Senior Member
RACING JUNKIE
 
fla1976's Avatar
 
Join Date: Aug 2007
Posts: 1,533
Default TH350

X2 on the 400.
fla1976 is offline  
Old 09-22-2009, 03:29 PM
  #6  
silver86
Junior Member
SHOW GUEST
 
Join Date: Dec 2006
Posts: 7
Default

will the bop th350 trans also fit the chevy engine?
silver86 is offline  
Old 09-22-2009, 03:33 PM
  #7  
Drtmod5
Senior Member
MASTER BUILDER
 
Join Date: Feb 2004
Location: IN
Posts: 177
Default

Go back & read the 2nd post! :shock:
Drtmod5 is offline  
Old 09-23-2009, 03:56 AM
  #8  
cepx111
Senior Member
RACING JUNKIE
 
Join Date: May 2006
Posts: 2,044
Default

Originally Posted by silver86
will the bop th350 trans also fit the chevy engine?
Yes, several companys make a adapter plate that allows you to bolt up a BOP TH350 to a chevy motor.

http://www.compperformancegroupstore...ct_Code=230000

Cp
cepx111 is offline  
Old 09-23-2009, 03:58 AM
  #9  
cepx111
Senior Member
RACING JUNKIE
 
Join Date: May 2006
Posts: 2,044
Default

Originally Posted by jreiley
That's good to hear. It was on a sbc. Save's me some bucks, for awhile.
Till that big iron shreds that weakling!!!

I'd go with a TH400 or a powerglide depending on application.

Cp
cepx111 is offline  
Old 09-25-2009, 12:53 PM
  #10  
Scooterz
Senior Member
RACING JUNKIE
 
Join Date: Mar 2006
Location: EUGENE,OR.
Posts: 3,408
Default

My Trans builder here in Oregon (he is a bracket racer) told me that a good built TH350 is only acceptable to about 450HP. He will not build one if the application is over that. TH400 is the way to go.
Scooterz is offline  

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service