help with wiring a rpm switch to a shift solenoid!!!!

Old 08-29-2009, 03:21 PM
Junior Member
Thread Starter
Join Date: Jun 2007
Location: lizella ga
Posts: 29
Default help with wiring a rpm switch to a shift solenoid!!!!

i have a NOS RPM WINDOW SWITCH and i am trying to wire a electric shift solenoid with it but i can't get the rpm switch to activate the solenoid if possible a diagram or any wiring help or scamatics!!! thanks
talgregory is offline  
Old 08-29-2009, 03:57 PM
Senior Member
Join Date: Sep 2007
Posts: 4,140

The way mine is set up the switch does not activate the solenoid, it kills the ground to it. It has a spring on it. When the ignition is on 12 volts goes to solenoid and holds plunger back...when it hits the rpm the switch is set at it cuts the ground to thev relay and the spring pushes the shifter fwd. Mine is not a window switch is just an MSD RPM switch
Tod74 is offline  
Old 09-09-2009, 12:08 AM
Senior Member
Join Date: May 2006
Posts: 2,044

I think most all electric shift solenoids work the way Tod explained, the window switch or rpm switch only drops the grounds out.
cepx111 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -