BOLT PATTERN?

Old 07-26-2009, 04:59 AM
  #1  
whitey70ss
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Apr 2009
Posts: 175
Default BOLT PATTERN?

I AM LOOKING AT BUYING A SET OF WHEELS OFF OF EBAY AND THE GUY IS TELLING ME THE WHEELS CAME OFF A STOCK CHEVY MONZA BUT THE BOLT PATTERN IS 4 1/2 IS THIS CORRECT ?? I THOUGHT THEY WERE 4 3/4??
whitey70ss is offline  
Old 07-26-2009, 06:16 AM
  #2  
fla1976
Senior Member
RACING JUNKIE
 
fla1976's Avatar
 
Join Date: Aug 2007
Posts: 1,535
Default Bolt pattern

Here is a site.

http://cjford.stormloader.com/Tech/boltcircleinfo1.htm

They were the same as the Vega which is a four bolt on a four inch. The V8 Monza may have had a different pattern.
My Vega front rotors were redrilled by Moser to a 5 bolt on a 4 1/2 inch pattern. I used a Ford bolt pattern wheel. The stock rotors cannot be redrilled to a 4 3/4 pattern due to their construction. The rotors were fine and I used a 69 Camaro non power master cylinder.

The rear was a 9 inch from a Ford LTD with a 5 bolt on a 5 inch pattern. I'd recommend a different pattern such as a 4 3/4 as the selection of wheels is greater.
fla1976 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -