RACING MOTOR FOR THE FIRST TIME

Old 05-20-2009, 10:17 AM
  #1  
JEFF69Z28
Senior Member
DYNO OPERATOR
Thread Starter
 
Join Date: Apr 2008
Posts: 496
Default RACING MOTOR FOR THE FIRST TIME

MOTOR IS 406 CHEVY,4340 CRANK,6 INCH H-BEAM RODS,JE FLAT TOP PISTONS WITH 2 VALVE RELIEFS MAYBE 11.5 COMP?CAM IS SOLID ROLLER WITH ROLLER LIFTERS AND ROCKERS 260/265 @50,678/688 EXHAUST,SUPER VICTOR INTAKE PORT MATCHED TO AFR 210CC HEADS COMP PORTED,PRO SYSTEMS 840 CFM CARB,MSD6AL IGNITION,8 INCH ATI CONVERTER,4:56 RING&PINION,TURBO 350 28X9X15 INCH SLICKS IN A 86 MONTE CARLO.SHOULD I JUST FLOOR IT OR BABY IT A COUPLE OF TIMES?
JEFF69Z28 is offline  
Old 05-20-2009, 10:20 AM
  #2  
FullTimeRacing
Senior Member
DYNO OPERATOR
 
Join Date: Mar 2008
Location: New Orleans,La
Posts: 515
Default

did you build it to baby?

I would just stomp it !
FullTimeRacing is offline  
Old 05-20-2009, 10:23 AM
  #3  
txhunter69
Senior Member
EXPERT BUILDER
 
Join Date: Apr 2009
Location: odessa tx
Posts: 288
Default

on race cars i would go balls to the wall every time if its gunna break now itll break later but street i would baby it for a while jmo
txhunter69 is offline  
Old 05-20-2009, 10:27 AM
  #4  
JEFF69Z28
Senior Member
DYNO OPERATOR
Thread Starter
 
Join Date: Apr 2008
Posts: 496
Default

DO YOU THINK THIS COMBO WILL PUT ME IN THE 10.50 TO 10.90 RANGE?
JEFF69Z28 is offline  
Old 05-20-2009, 11:01 AM
  #5  
FullTimeRacing
Senior Member
DYNO OPERATOR
 
Join Date: Mar 2008
Location: New Orleans,La
Posts: 515
Default

what dose it weigh or way :?:
FullTimeRacing is offline  
Old 05-20-2009, 11:03 AM
  #6  
JEFF69Z28
Senior Member
DYNO OPERATOR
Thread Starter
 
Join Date: Apr 2008
Posts: 496
Default

3485 WITH DRIVER
JEFF69Z28 is offline  
Old 05-20-2009, 11:08 AM
  #7  
FullTimeRacing
Senior Member
DYNO OPERATOR
 
Join Date: Mar 2008
Location: New Orleans,La
Posts: 515
Default

mine is #3000 with me and I run (depending on the weather)10.70-11.10 running a 360 cid.big roller

I hope the T-350 is built.
FullTimeRacing is offline  
Old 05-20-2009, 11:11 AM
  #8  
JEFF69Z28
Senior Member
DYNO OPERATOR
Thread Starter
 
Join Date: Apr 2008
Posts: 496
Default

MY OTHER MOTOR (406) RAN 11.60 WITH A 510 LIFT CAME 10 INCH CONVERTER AND 3.90 GEARS.
JEFF69Z28 is offline  
Old 05-20-2009, 02:28 PM
  #9  
FullTimeRacing
Senior Member
DYNO OPERATOR
 
Join Date: Mar 2008
Location: New Orleans,La
Posts: 515
Default

I have 4.56 & 30in tall tires,T-350(that is now broke) 8) and go through the lights at 7000 rpm.

I think you will need a bigger tire.
FullTimeRacing is offline  
Old 05-20-2009, 02:37 PM
  #10  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,143
Default

Originally Posted by txhunter69
on race cars i would go balls to the wall every time if its gunna break now itll break later but street i would baby it for a while jmo
WHY?
Tod74 is offline  

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service