Project 388ci

Old 05-09-2009, 05:55 PM
  #1  
jerryms
Member
JOURNEYMAN
Thread Starter
 
Join Date: Aug 2003
Posts: 30
Default Project 388ci



Yup I Bought A 350CI Block Bout Week and A Half Ago And Helped My Buddy So I Could Get Pistons Fer It Jus Got It Back From The Machine Shop Bored .30 Over Time To Assemble. The Ole 350CI In The Vette Wasnt Good Nuff Did A Best Of 13.20's On BF Goodrich Tires

The Block

The Crankshaft

The Goodies Got A Buncha Stuff Fer Cheap At Rebel Performance

Got The Crankshaft On Pistons On Camshaft In And Flywheel On

Pistons
jerryms is offline  
Old 05-09-2009, 07:28 PM
  #2  
mytmouz
Senior Member
RACING JUNKIE
 
mytmouz's Avatar
 
Join Date: May 2006
Location: Pelahatchie, MS
Posts: 995
Default

8)
mytmouz is offline  
Old 05-09-2009, 07:55 PM
  #3  
MEMRACING62
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Location: orland pk il
Posts: 2,429
Default

LETS FIRE IT UP :!: :!: :wink:
MEMRACING62 is offline  
Old 05-09-2009, 08:23 PM
  #4  
mopar1968
Senior Member
RACING JUNKIE
 
mopar1968's Avatar
 
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,579
Default

But it's a ''chebby'' :? :? :? :lol: :lol:




''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312
mopar1968 is offline  
Old 05-10-2009, 11:21 AM
  #5  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,143
Default

Maybe I'm Paranoid Floyd...but no way would I put mine together around that much dirt and what have you....just my opinion.
Tod74 is offline  
Old 05-10-2009, 04:00 PM
  #6  
bbchevy
Senior Member
RACING JUNKIE
 
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
Default Dirt?

Yeah Tod,
But?He has a 1 OFF ENGINE Stand???
Later
G :shock:
bbchevy is offline  
Old 05-12-2009, 12:26 AM
  #7  
cepx111
Senior Member
RACING JUNKIE
 
Join Date: May 2006
Posts: 2,044
Default

Yeah I seen that nice engine stand too...lol
In his defense, I know a guy who runs a engine rebuilding shop here in Memphis ( big Al's )
He builds all his motors on a old bucthers block, doesn't believe in engine stands at all.
The shop could use some tidying up though.

Cp
cepx111 is offline  
Old 05-12-2009, 02:07 AM
  #8  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,143
Default

I wasn't dogging him not having a stand...it was his ring compressor laying in the dirty floor and all those metal shavings / dirt or whatever they are on the ground around his parts and tools....
Tod74 is offline  
Old 05-12-2009, 10:16 PM
  #9  
cepx111
Senior Member
RACING JUNKIE
 
Join Date: May 2006
Posts: 2,044
Default

I'm digging that lunati steel crank and that nice bow in the board.
cepx111 is offline  
Old 05-23-2009, 10:03 PM
  #10  
kwkracing
Senior Member
RACING JUNKIE
 
Join Date: Dec 2004
Location: austin texas
Posts: 729
Default

i like how the grinder is layin next to the CLEAN motor. Lol
kwkracing is offline  

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service