Rupert Lean out valve

Old 04-27-2009, 05:34 AM
  #1  
dynaguy03
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Feb 2008
Location: New Jersey
Posts: 133
Default Rupert Lean out valve

I see many people have this "dial" like lean out valve made by Rupert using vacume.
Where can i get one? Looks like Rupert doesnt have a website.

Thanks
Keith
dynaguy03 is offline  
Old 04-27-2009, 06:00 AM
  #2  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default Re: Rupert Lean out valve

Originally Posted by dynaguy03
I see many people have this "dial" like lean out valve made by Rupert using vacume.
Where can i get one? Looks like Rupert doesnt have a website.

Thanks
Keith
Not sure what the dial one is, but before he used to just send a normal lean out valve you could get from mcmaster carr
hammertime is offline  
Old 04-27-2009, 10:02 AM
  #3  
dynaguy03
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Feb 2008
Location: New Jersey
Posts: 133
Default lean out valve

Thanks David... do you know what they might call such a thing in this massive McMaster -Carr catalog "Abyss"..lol
dynaguy03 is offline  
Old 04-27-2009, 10:21 AM
  #4  
curtisreed
Senior Member
RACING JUNKIE
 
curtisreed's Avatar
 
Join Date: Feb 2004
Location: KIEFER, OK.
Posts: 1,311
Default

Keith,

Go to this page

http://www.mcmaster.com/#catalog/115/455/=1mnr5p

Easy slide sleeve valve about half way down the page. 4622k55 is one if the link doesn't work.

Curtis
curtisreed is offline  
Old 04-27-2009, 07:29 PM
  #5  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

Originally Posted by doorracer
Keith,

Go to this page

http://www.mcmaster.com/#catalog/115/455/=1mnr5p

Easy slide sleeve valve about half way down the page. 4622k55 is one if the link doesn't work.

Curtis

Thats it, I used it when I ran rupert stuff.
hammertime is offline  
Old 04-28-2009, 10:46 AM
  #6  
dynaguy03
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Feb 2008
Location: New Jersey
Posts: 133
Default

Curtis /David

Thanks for your help .. i have a Mc Master Carr close .. so i went and picked up the valve.. its exactly like the ones i see on everyones car.. was pretty cheap too!!
Off i go with the gas to Alky conversion.. i hope this goes smooth.. just waiting on my APD 950

THANKS AGAIN
Keith
dynaguy03 is offline  
Old 04-28-2009, 12:45 PM
  #7  
curtisreed
Senior Member
RACING JUNKIE
 
curtisreed's Avatar
 
Join Date: Feb 2004
Location: KIEFER, OK.
Posts: 1,311
Default

Keith,
Which part number did you get exactly? The one I ordered was black, most that I have seen were red. Just wondering. Thanks.

Curtis
curtisreed is offline  
Old 04-28-2009, 07:19 PM
  #8  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

Originally Posted by dynaguy03
Curtis /David

Thanks for your help .. i have a Mc Master Carr close .. so i went and picked up the valve.. its exactly like the ones i see on everyones car.. was pretty cheap too!!
Off i go with the gas to Alky conversion.. i hope this goes smooth.. just waiting on my APD 950

THANKS AGAIN
Keith
they are much cheaper then the carb places sell them for
hammertime is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service