throttle body swap

Old 04-13-2009, 09:37 AM
  #1  
txhunter69
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Apr 2009
Location: odessa tx
Posts: 288
Default throttle body swap

i just pulled my 454 out and was wondering if a bored out the stock sbc intake manifold and swapped the computers could a run the throttle body off my 454 on my 350 because the cfm difference is huge and idk if that too much fuel and idk if it will drown out my motor
txhunter69 is offline  
Old 04-13-2009, 12:19 PM
  #2  
CamBirdRacing
Senior Member
DYNO OPERATOR
 
Join Date: Feb 2009
Posts: 510
Default

From what I believe, the injectors run different. I'm not a efi expert, but I have tried a v-8 throtle body on a v-6 and it didn't work. Had to swap the injectors over. Other than that it worked.
CamBirdRacing is offline  
Old 04-13-2009, 12:25 PM
  #3  
txhunter69
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Apr 2009
Location: odessa tx
Posts: 288
Default

ok well will the injectors give the amount of fuel necessarty cause the 454 tb is huge conpared to the 350 tb
txhunter69 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service