MANUAL BRAKES,HELP!!

Old 03-31-2009, 05:22 AM
  #1  
JEFF69Z28
Senior Member
DYNO OPERATOR
Thread Starter
 
Join Date: Apr 2008
Posts: 496
Default MANUAL BRAKES,HELP!!

I HAVE A MP BRAKES CONVERSION FOR MY 86 MONTE CARLO WHEN I PUT THE MASTER CYLINDER ON THE CAR THE PUSH ROD THAT COMES WITH THE KIT IS 1/8 INCH OFF CENTER, IM USEING THE TOP HOLE ON THE BRAKE PEDAL.WHAT SHOULD I DO TO SOLVE THIS PROBLEM.
JEFF69Z28 is offline  
Old 04-13-2009, 12:23 AM
  #2  
radicalz
Senior Member
MASTER BUILDER
 
Join Date: Dec 2004
Location: out of my mind in Kalamazoo, MI
Posts: 179
Default Re: MANUAL BRAKES,HELP!!

Originally Posted by JEFF69Z28
I HAVE A MP BRAKES CONVERSION FOR MY 86 MONTE CARLO WHEN I PUT THE MASTER CYLINDER ON THE CAR THE PUSH ROD THAT COMES WITH THE KIT IS 1/8 INCH OFF CENTER, IM USEING THE TOP HOLE ON THE BRAKE PEDAL.WHAT SHOULD I DO TO SOLVE THIS PROBLEM.
Are you converting from the original set up of power brakes to the MP set up?....does it have a booster?...1/8 inch off center is a bunch...make sure the rod is not bent...put it on a flat surface and roll it...does it wobble? then it is probably bent...call MP tech line tell them what your problem is they should be able to help you or find a new one...
radicalz is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service