Any advice on how to scale a Dirt Car

Old 03-27-2009, 09:47 PM
Junior Member
Thread Starter
Join Date: Mar 2009
Posts: 1
Default Any advice on how to scale a Dirt Car

Street stock, dirt car, anyone have do's and don'ts on how to scale? weights?
sspc is offline  
Old 03-28-2009, 10:33 AM
Join Date: Dec 2005
Location: Building shelves for wally's
Posts: 36

On a street stock these #'s may be hard to get, a lot of times your 50.5 or so on the left and less than 50% rear but here a few #'s to shoot for.
53% of total on the left side.
52% of total on the rear if possible.
Left rear around 100 lbs heavier than right rear
Frame heights should be 1/2" higher on right front than the left front and 1.5" higher in the rear than front
1" tire stagger across the front and 1.5" - 2" across the rear.
Hope you can run jack bolts on the springs.

oobob is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -