HP Guesstimate/ Desktop Dyno

Old 03-25-2009, 06:27 PM
  #1  
Notalent
Member
MASTER JOURNEYMAN
Thread Starter
 
Join Date: Dec 2007
Location: Grand Prairie, Texas
Posts: 36
Default HP Guesstimate/ Desktop Dyno

454 Stroked to a 496
4340 Forged Crank
H Beam Rods
KB Forged 10.1:1 Compression Pistons
Profiler 320cc/119cc Heads 2.300/1.880 Valves
Hyd Roller 248/256 @50 629/643 Lift on a 112 LSA
Crane Gold 1.7 Rockers
Edelbrock Air Gap Manifold
Quick Fuel 830CFM Street/Strip Carb
Mech Fuel Pump

My heads, crank and rods should be here by friday than its time for assembly. Block is prepped and ready to go. I will hopefully have her on our dyno within 2-3 weeks :lol: Than its off to getting the TH400 done and a Dennys Driveshaft made up 8)
Notalent is offline  
Old 03-25-2009, 10:11 PM
  #2  
slickfuel
Member
CRAFTSMAN
 
Join Date: Mar 2005
Location: Washington state
Posts: 61
Default

10:1 pistons,..is that with those heads ?????

if so this is what I get,...


554 HP @ 5500
576 FTLBS @ 4500
slickfuel is offline  
Old 03-26-2009, 06:01 AM
  #3  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

650ish
hammertime is offline  
Old 03-26-2009, 06:57 AM
  #4  
Notalent
Member
MASTER JOURNEYMAN
Thread Starter
 
Join Date: Dec 2007
Location: Grand Prairie, Texas
Posts: 36
Default

Originally Posted by slickfuel
10:1 pistons,..is that with those heads ?????

if so this is what I get,...


554 HP @ 5500
576 FTLBS @ 4500
Yes 10.1:1 and they are 119cc
Notalent is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service