racing radio ptt wiring.. help!

Old 03-16-2009, 06:28 AM
  #1  
rickmartin96
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Oct 2007
Posts: 2
Default racing radio ptt wiring.. help!

Does anyone have diagram for wiring for ptt radio harness (car harness). Helmet is nascar type connector (1/4) . My ex took my son to races a couple weeks ago and somehow pulled all the wires out of the connectors on the harness. Radio has motorola type plug. It had a small molded box with one resistor in it but cant tell how was orignally wired. Dont really want to buy a new harness.........thanks in advance! if you do you can email it to me at [email protected] or post it on here.
rickmartin96 is offline  
Old 05-29-2009, 05:07 PM
  #2  
Nitro2way
Junior Member
SHOW GUEST
 
Join Date: May 2004
Posts: 4
Default

What connections were pulled out? The PTT are just 2 3 pin connectors that only 2 get used. Now if you pulled all the PTT and audio from the circuit board your in trouble. Its time for a new harness. I carry a new harness and jumper for Motorola radio and the best part is you won't have to worry about that happening again. Mine don't have a circuit board AND there molded ends that keep you from yanking the wires out of the Switchcraft connections. There only $85 for the harness and jumper.

Dan
Chi-Town race products
(708)598-4680
Nitro2way is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service