backhalfing 94 s10 with 4-link question

Old 03-12-2009, 09:34 PM
Junior Member
Thread Starter
Join Date: Jan 2008
Location: decatur, il.
Posts: 14
Default backhalfing 94 s10 with 4-link question

im using s&w 10-400 pro 4 link kit. my question is on installing the backhalf. ive got the bare frame all leveled up at what i believe is ride height, ive got the frame cut off where the wheel base will be correct which is 27" forward of the old rearend center of axle tube. i was told that i should center the lower 4 link brackets (mine has 4 holes) with the center line of the main frame. the s10 frame turns upward about 6" before where i had to cut it. so that butts my crossmember up against it with only the top 1-1/4" to weld to the existing frame. i was going to gusset and plate this all in for strength. this kit is prewelded and i was going to place it with the center of the mainframe lining between the 2nd & 3rd hole on the lower link bracket. does any of this sound correct????
thanks, brian
mwestchevy is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -