Tunnel rams

Old 03-10-2009, 02:20 PM
  #1  
showbusiness
Member
CRAFTSMAN
Thread Starter
 
Join Date: Nov 2005
Posts: 58
Default Tunnel rams

Am interested in locating a tunnel ram to match up to a set chapman edelbrock raised port heads ,sbc Thanks
showbusiness is offline  
Old 03-10-2009, 05:29 PM
  #2  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

You maybe able to use a std. tunnel ram with those heads. I had a similar problem fitting stacks injection on Brodix 10 RP's. I had to make 1/4" spacer for the top of the blk. between the blk and bottom of the manifold, and had to use the .120 tk intake gaskets to get the ports to line up. It's what worked for me.

Zip.
zipper06 is offline  
Old 03-11-2009, 03:56 AM
  #3  
showbusiness
Member
CRAFTSMAN
Thread Starter
 
Join Date: Nov 2005
Posts: 58
Default Tunnel rams

Thanks for reply ,see lots of rams out there but nothing for a direct bolt on.
showbusiness is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service