Enderle injection pills???????

Old 03-07-2009, 06:11 PM
  #1  
jrthone
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: Oct 2005
Location: Wellington , New Zealand
Posts: 122
Default Enderle injection pills???????

I need your guys thoughts again. I am just about to run up my 632 BBC that i have been building for the last 6 months. I need to know what size injector nozzles and pills to run for first start up on the dyno. I can tune it from there.

Stats are:

632 Big Block chev , 14-1 CR , Mild port BB3 Xtra heads. Enderle bird catcher on edelbrock victor 2R Ram. 800-800 lift 114 lobe seperation 4-7 swap cam. Let me know what else you guys need. Its in a 2800lbs super stock. 1.80 2 speed glide with 4.86 rear end.

any help much appreciated
jrthone is offline  
Old 03-08-2009, 06:15 AM
  #2  
demented
Member
JUNIOR BUILDER
 
Join Date: Jun 2004
Location: lake luzerne n.y.
Posts: 87
Default

I had that close to that same combo last year.
36 nozzles and 100 pill with a 80a-1 pump.
If you are looking for some real good info, look at the calculator on spud millers website.
http://www.fuelinjectionenterprises.com/

The best suggestion I can give you is to have the system flowed. That way you can see if you need a high speed or lean out.
Call Dave Koehler at Koehler injection,
http://www.koehlerinjection.com/
He does an awesome job and the service after the sale is awesome. I had my system flowed by him and I am so happy I did it. Well worth it.
demented is offline  
Old 03-08-2009, 08:33 AM
  #3  
maxpower671
Senior Member
SENIOR BUILDER
 
Join Date: Dec 2005
Posts: 117
Default Spuds!

another vote for Spud Miller 8)

great service and helpful!
maxpower671 is offline  
Old 03-08-2009, 11:16 AM
  #4  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

Like (demented) stated, the pill size, really depends on the pump size you're running IE 80a-1 equals about 7 GPM, a (0) pump between 3 and 4 GPM, which would require a smaller pill, use Spuds chart it will get you close.

JMO

Zip.
zipper06 is offline  
Old 03-08-2009, 04:42 PM
  #5  
ashbros
Senior Member
RACING JUNKIE
 
Join Date: Nov 2004
Location: St. Louis, Missouri
Posts: 664
Default

demented
SENIOR BUILDER


Joined: 30 Jun 2004
Posts: 113
Location: lake luzerne n.y.
Posted: Sun Mar 08, 2009 1:15 pm Post subject:

--------------------------------------------------------------------------------

I had that close to that same combo last year.
36 nozzles and 100 pill with a 80a-1 pump.
If you are looking for some real good info, look at the calculator on spud millers website.
http://www.fuelinjectionenterprises.com/

The best suggestion I can give you is to have the system flowed. That way you can see if you need a high speed or lean out.

ashbros writes:

I had a very sinilar set up and ran pretty much the same as listed above with the exception to the pill size. I ran 109's
ashbros is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service