C-4 reverse servo keeps breaking any ideas why?

Old 03-02-2009, 04:10 PM
Junior Member
Thread Starter
Join Date: Jan 2005
Posts: 2
Default C-4 reverse servo keeps breaking any ideas why?

I have a small block ford mustang with a C-4 3500 converter stock internals with a B&M shift kit.
I been running this set up for 7 years in this car with no trouble until the servo and the application fork for the reverse band broke
since then it has broke three times after i rebuild the trans changed the valve body with a different stock valve body readjusted the bands three times.the application fork is broken right down the middle like it has been broken by the servo pushing on it to hard.

I did not find anything that looked out of the ordinary inside the trans

has any one ever had this problem or does any body have any idea why this would happen
matt822 is offline  
Old 03-02-2009, 10:30 PM
Senior Member
Join Date: May 2006
Posts: 2,044

You might try posting this in the transmission section of this forum>

cepx111 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -