what size fuel pump

Old 01-16-2009, 10:03 AM
  #1  
hotrodharley
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Dec 2002
Location: spring creek nv.
Posts: 328
Default what size fuel pump

what size fuel pump do you think i need for my engine combo below?

CAR BUILD SPECS
540bbc/11.8 comp pistons/heads will be done by curtis[pro valve job/c-n-c ported and flowed/i think he said around 445 cc flow but don't remember if that is before or after he works on them]they are brodix 2-plus heads/roller cam with 736 lift 116 LC ;871 stage 4 blower/aly injection bird catcher w/modified square doors]mallory super maglll ign.//trans is PG with 10 disc high gear-stright cut 1;80 planitary-trans brake/4;88 rear gears/spool/32.14.5 slicks/
62 nova wagon built into a 2 door seden delivery with glass doors/front end/guted tail gate-full chassis car with M/S cage[hope to certifie to 7;50/has steel firewall and steel floor with middle trans tunnel and drive line tunnel aluminum/christ alston a-arm front end/ladder bar rear/
hotrodharley is offline  
Old 01-16-2009, 10:10 AM
  #2  
dparker
Senior Member
RACING JUNKIE
 
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
Default

I know guys that run Holley blues and blacks with no problem. My advice would be a Magna Fuel 400 or 500 pump. run #10 to the pump, #8 to your regulator, and #6 to the carb. Magna Fuel also has a good billet regulator for around $120.00. I know this way would be no worries!!
dparker is offline  
Old 01-16-2009, 10:13 AM
  #3  
hotrodharley
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Dec 2002
Location: spring creek nv.
Posts: 328
Default

Originally Posted by dparker
I know guys that run Holley blues and blacks with no problem. My advice would be a Magna Fuel 400 or 500 pump. run #10 to the pump, #8 to your regulator, and #6 to the carb. Magna Fuel also has a good billet regulator for around $120.00. I know this way would be no worries!!
i've got a alky bird catcher enderle injection hat[no carbs]need a size for the enderle cam drove mech pump?
hotrodharley is offline  
Old 01-16-2009, 11:24 AM
  #4  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

You need an Enderle 110 pump that pumps 9.8 gpm or a hilborn -2 which pumps about the same.If you were running gas you could get away with a enderle 80A-1 pump or a hilborn -1 that pumps 6.8 gpm, also with a min. #12, preferrable #14 feed line to the pump and #8 to the injection. You will also have to have a front mounted tank. I run a 3 gal tank, but only run 1/8 mile and drive to the starting line and back to the pits, I use a little less than 2 gal. You may need a bigger tank or tow the car if you plan to run 1/4 mile. But if you plan to run the 1/4 mile i think you'll have to come down on the gear to a 4.10.

If you are going to buy a new one don't let someone talk you into a 990 pump that pumps about 13.8 GPM, it's over kill and a waste of $$$$ unless you plan to add a little or lot of nitro.


JMO

Zip.
zipper06 is offline  
Old 01-16-2009, 12:19 PM
  #5  
dparker
Senior Member
RACING JUNKIE
 
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
Default

Thanks for the back up zip?
dparker is offline  
Old 01-19-2009, 02:52 PM
  #6  
pintoracer
Junior Member
APPRENTICE
 
Join Date: Feb 2003
Posts: 21
Default

ya stick a holley blue on that one LMAO
pintoracer is offline  
Old 01-19-2009, 03:09 PM
  #7  
dparker
Senior Member
RACING JUNKIE
 
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
Default

Looks like I should have read the whole ad before answering. Zip knows way more than I every will on a blower.
dparker is offline  
Old 01-19-2009, 04:01 PM
  #8  
suicidebomb
Senior Member
RACING JUNKIE
 
Join Date: Jul 2007
Location: Independence, Missouri
Posts: 1,188
Default

!!!Yeah?? and naturally asperated!! LMAO
suicidebomb is offline  
Old 01-19-2009, 04:24 PM
  #9  
dparker
Senior Member
RACING JUNKIE
 
Join Date: Jun 2003
Location: Hobbs, NM
Posts: 842
Default

Even if that statement is true thats enough butt kissing!!!!!!!!! :lol:
dparker is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service