BACK HALF PRICING

Old 12-23-2008, 06:51 AM
  #1  
fsdragster
Member
MASTER JOURNEYMAN
Thread Starter
 
Join Date: Oct 2006
Posts: 35
Default BACK HALF PRICING

WANTING TO KNOW THE FAIR PRICE TO HAVE A 69 CHEVELLE BACKHALFED TO ACCEPT A 18.5 TO 22.5 STREET TIRE. THE CAR HAS A STOCK 12 BOLT. THE CAR WILL ONLY BE DRIVEN ON THE STREET SO I WOULD THINK IT SHOULD BE ABLE TO BE DONE CHEAPER THAN AN ALL OUT RACE ONE. WOULD ALSO PAY FOR ALL PARTS AND LABOR IN CASH. I ALSO RESIDE IN FLORIDA IF ANYONE KNOWS OF A FABRICATOR. THANKS FRANK
fsdragster is offline  
Old 12-23-2008, 09:41 AM
  #2  
performanceengin
Member
JUNIOR BUILDER
 
Join Date: Oct 2005
Location: ohio
Posts: 94
Default

labor will be the same for street or race. you can shop and find econo kits that are good for street. the kit will be the only money diff. check sxw, comp enginnering, and others on line.
performanceengin is offline  
Old 12-23-2008, 02:26 PM
  #3  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

I have a A.R.T. frame and narrowed fab 9" housing, they also sell backhalf kits. They are in Fl. and i believe they have a chassis shop near them that they use. You could call them to verify this, they are really good people to deal with and some of the staff also runs cars.

Zip.
zipper06 is offline  
Old 12-23-2008, 06:26 PM
  #4  
bjuice
Administrator
RACING JUNKIE
 
bjuice's Avatar
 
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,239
Default

I got a great Guy here in S.C....not to far of a drive for a Big Job like your wanting..he is VERY reasonable ,good work and their stuff works.

i Hooked him and Cris ( Bowtie4542001) up..Cris drove up one afternoon from mid GA and they built him a set of headers for his small block chevy while he waited at waffle House. The he came to my house and we fired that little 406 beast up.

I highly recommend these guys because of ( Price, Quality)

if your interested let me know and i will PM you the contact Numbers..

i seriuolsy do not think you will beat their prices for the Quality work that will be done.

location is just 2 hours north of Atlanta.

Brian
__________________
Bjuice..

"I'M YOUR HUCKLEBERRY ! "
bjuice is offline  
Old 12-24-2008, 03:12 AM
  #5  
bowtie4542001
Senior Member
DYNO OPERATOR
 
Join Date: Jan 2003
Location: Douglasville Ga
Posts: 474
Default

Originally Posted by bjuice
I got a great Guy here in S.C....not to far of a drive for a Big Job like your wanting..he is VERY reasonable ,good work and their stuff works.

i Hooked him and Cris ( Bowtie4542001) up..Cris drove up one afternoon from mid GA and they built him a set of headers for his small block chevy while he waited at waffle House. The he came to my house and we fired that little 406 beast up.

I highly recommend these guys because of ( Price, Quality)

if your interested let me know and i will PM you the contact Numbers..

i seriuolsy do not think you will beat their prices for the Quality work that will be done.

location is just 2 hours north of Atlanta.

Brian
I vouch for this guy. Very reasonable and great quality. Couldn't find a set of headers for my old Vega and Brian recoomended him, called him up and we agreed to meet at his shop. He was there when he said he was going to be there and started on the car without any delay. Had it done in a couple of hours. He was the reason I was able to run at the Pinks All Out when it came to Commerce.

Brian, I hope that you and your family have a Merry Christmas and a Happy New Year. Can't wait for me and the family to be able to come back your way (This time I will bring my Camaro ) Happy Holidays my friend.
Chris
bowtie4542001 is offline  
Old 12-24-2008, 08:35 AM
  #6  
russ67chevelle
Senior Member
EXPERT BUILDER
 
Join Date: Jan 2005
Posts: 336
Default

i would highly recomend the locker style!!!spool for me but others will disagree for street use so refer to my first sentence
russ67chevelle is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service