how do you wire a starter button

Old 08-24-2008, 08:56 AM
  #1  
bmita
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Nov 2007
Posts: 4
Default how do you wire a starter button

i have a 29 A hot rod with a 283 chevy in it. i am wanting to wire up a starter button like back in the old days. it now has a key switch in it now how can i wire in a starter button with this switch? who makes the best switch? any help would be great thanks bmita
bmita is offline  
Old 08-24-2008, 09:14 AM
  #2  
dak697
Senior Member
MASTER BUILDER
 
Join Date: Mar 2003
Posts: 127
Default

with the Key in the "On" position.

You need to find a power source so you can run powr to the new switch.

You need to find the wire that goes from the keyed switch to the starter,

Cut that wire and wire it into 1 side of your switch, power goes to the other side of the switch. I would suggest putting a fuse in line.

Cole Hearse makes pretty good stuff.

you should be able to turn the key to the "on" position and then press the starter button

Good luck
dak697 is offline  
Old 08-24-2008, 09:18 AM
  #3  
jmarksdragster
Senior Member
RACING JUNKIE
 
jmarksdragster's Avatar
 
Join Date: Jul 2007
Location: Florida
Posts: 635
Default

A sealed marine push button would be a good idea. You can wire it hot to the battery or if you want the ignition to trigger it run it through a relay. This is the type of switch I suggest.
http://www.reddenmarine.com/site/new...m?id=CHRM626BP
jmarksdragster is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service