Procharger Motor build up Help

Old 07-28-2008, 06:33 PM
  #1  
dak697
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Mar 2003
Posts: 127
Default Procharger Motor build up Help

I want to build a Procharger motor, but this is for a 9.90/10.90 Car. .

I would like some input on the motor program.

I would like to build a 480-500 BBC
10-1 pistons
Alum Heads
Alcohol Mechanical Injection
20 psi Boost

I know that most of these motors are low compression gas carb or elec fuel injection.

Do I build the motor like our Blown SBC Top Dragster deal.
Alum Rods, 11.5-1 pistons
Or
Can I/Should I build it with good steel rods and a good crank

What do these guys with 565 BBC and 12-1500 HP have for internals?
dak697 is offline  
Old 07-28-2008, 08:20 PM
  #2  
mudjeep
Junior Member
SHOW GUEST
 
Join Date: Apr 2005
Posts: 5
Default

If it were mine it would have at least 11.5 for compression and aluminum rods, but you could probably get by with steel rods at that power level
mudjeep is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service