nitrous

Old 07-27-2008, 05:06 PM
  #1  
talgregory
Junior Member
JOURNEYMAN
Thread Starter
 
Join Date: Jun 2007
Location: lizella ga
Posts: 29
Default nitrous

how do you flow a nitrous system :?:

thanks
tal gregory
talgregory is offline  
Old 07-27-2008, 05:08 PM
  #2  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

http://www.jegs.com/i/Nitrous%20Expr...15529/10002/-1
hammertime is offline  
Old 07-28-2008, 05:45 PM
  #3  
demented
Member
JUNIOR BUILDER
 
Join Date: Jun 2004
Location: lake luzerne n.y.
Posts: 87
Default

Originally Posted by hammertime
http://www.jegs.com/i/Nitrous%20Express/744/15529/10002/-1
That will only flow the fuel system.

Are you looking to flow just the fuel system or both the nitrous and fuel?
demented is offline  
Old 07-31-2008, 09:05 AM
  #4  
talgregory
Junior Member
JOURNEYMAN
Thread Starter
 
Join Date: Jun 2007
Location: lizella ga
Posts: 29
Default nitrous

both
talgregory is offline  
Old 07-31-2008, 09:44 AM
  #5  
demented
Member
JUNIOR BUILDER
 
Join Date: Jun 2004
Location: lake luzerne n.y.
Posts: 87
Default

It's difficult to do without the right equiptment to flow a nitrous system and to do it correctly. As a matter of fact not many guys are doing it. Most of the guys that are flowing there systems are doing it thru some of the nitrous experts in the industry. Guys like Jeff prock, Dave Koehler, the guys at speedtech, and there are many others. If you want to have a flowed system call one of the guys that do it every day. They can add the "tricks of the trade" into your system to make it work to its full potential. Plus you will have the added benefit of technical service after its all done. Its not too expensive either(usually around $400.00 for the service) Hope this helps.
demented is offline  
Old 08-02-2008, 07:33 AM
  #6  
talgregory
Junior Member
JOURNEYMAN
Thread Starter
 
Join Date: Jun 2007
Location: lizella ga
Posts: 29
Default nitrous

thanks for the help
talgregory is offline  
Old 08-07-2008, 10:33 AM
  #7  
CarbGuy
Junior Member
SHOW GUEST
 
Join Date: Aug 2008
Posts: 6
Default

You can send the system to someone, or if you're doing a lot of nitrous racing you can fabricate a flow test fixture to see how it's flowing.

A simple fixture would use a fuel flow meter (to measure the fuel flow) a scale, and a timer. You turn the nitrous on for a set amount of time (say 10 seconds) and then do the math to determine your A/F ratio.
CarbGuy is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service