1150 dominator no power valve?

Old 07-07-2008, 01:49 PM
  #1  
CHEVYMATT
Member
JUNIOR BUILDER
Thread Starter
 
Join Date: Nov 2004
Posts: 91
Default 1150 dominator no power valve?

i bought a 1150 hp dominator from a swap and it looks in good condition. i dont recall the numbers but it did come up as a 1150hp
anyway i removed the bowls to check power valves and jetting and found front 84 with no power valve hole at all and rear 86 with no power valve hole at all. it is not even an option .. is this common on the 1150 hp's.or do i have two rear mettering blocks on this carb it also has progressive linkage..
thank you
CHEVYMATT is offline  
Old 07-07-2008, 04:54 PM
  #2  
jmarksdragster
Senior Member
RACING JUNKIE
 
jmarksdragster's Avatar
 
Join Date: Jul 2007
Location: Florida
Posts: 635
Default

No power valves. Those jets are low for an 1150, 92 to 99 depending on the model #. Check here for factory jetting and start there.
http://www.holley.com/data/TechServi...%20Listing.pdf
jmarksdragster is offline  
Old 07-07-2008, 07:21 PM
  #3  
CHEVYMATT
Member
JUNIOR BUILDER
Thread Starter
 
Join Date: Nov 2004
Posts: 91
Default thanks

thanks for the site it will come in handy
CHEVYMATT is offline  
Old 07-07-2008, 08:18 PM
  #4  
jmarksdragster
Senior Member
RACING JUNKIE
 
jmarksdragster's Avatar
 
Join Date: Jul 2007
Location: Florida
Posts: 635
Default

Here is some more to swallow.

http://speedtalk.com/forum/viewtopic.php?t=9934
http://www.motorsportsvillage.com/fo...pic.php?t=3283
http://www.motorsportsvillage.com/fo...pic.php?t=3742
http://www.motorsportsvillage.com/fo...pic.php?t=3811
jmarksdragster is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service