Help Needed Please

Old 06-03-2008, 07:57 PM
  #1  
s10dragracer
Member
CRAFTSMAN
Thread Starter
 
Join Date: Jan 2004
Location: Georgia
Posts: 51
Default Help Needed Please

Ok guys, I need a favor please. I am using a Progressive Instruments nitrous controller. It is a multi stage controller nitrous controller. Without the solenoid wires hooked up to the controller the controller will delay and pulse as programmed perfectly. Now when I hook the solenoid wires up to the controller the first stage will delay and pulse as required but when the second and third kit comes on all stages sit there and pulse until you let off the microswitch. I have double checked that the solenoid wires are correct. Now here is the other odd part, if I was to activate, delay, and pulse each stage individual they work perfect but when 2 or more stages are activated they do this pulsing effect. It is almost like when 2 or more stages are activated that it is drawing too much amperage somehow. Each stage has it's own relay but constant hot going to all nitrous relays are all from the same wire but is a 12 gauge wire. Any help will be greatly appreciated.
Thanks,
Travis
s10dragracer is offline  
Old 06-04-2008, 03:25 AM
  #2  
johnracer
Senior Member
DYNO OPERATOR
 
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
Default

May be a ground problem. Either with the controller or the relays. Do all the relays ground at the same location? Try running a jumper from the ground point to the battery neg post and retest....
johnracer is offline  
Old 06-04-2008, 05:24 AM
  #3  
s10dragracer
Member
CRAFTSMAN
Thread Starter
 
Join Date: Jan 2004
Location: Georgia
Posts: 51
Default Thanks

I will try that. Thanks.
s10dragracer is offline  
Old 06-04-2008, 07:12 PM
  #4  
s10dragracer
Member
CRAFTSMAN
Thread Starter
 
Join Date: Jan 2004
Location: Georgia
Posts: 51
Default

Problem fixed. Had to add another hot source to the #30 on my relays. Works perfect now. Thanks
s10dragracer is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service