1/4 mile est.

Old 05-29-2008, 07:44 PM
  #1  
us7race
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Aug 2005
Location: Tell City, IN
Posts: 356
Default 1/4 mile est.

I ran at a 1/4 mile track awhile back and ran out of gear just past the 1/8th I coasted thru the 1/4...What should it have ran here are the incrimentals...
1.325 60'
3.978 330'
6.250 1/8th
107.6 MPH at the 1/8th
8.275 at the 1000'
10.251 1/4 Coasting somewhere after the 1/8th
107.5 MPH 1/4mile...

Thanks for any input..I figure someone out there runs the 1/4 with close to these times....
us7race is offline  
Old 05-29-2008, 07:55 PM
  #2  
mytmouz
Senior Member
RACING JUNKIE
 
mytmouz's Avatar
 
Join Date: May 2006
Location: Pelahatchie, MS
Posts: 996
Default

About a 9.60 or so...
mytmouz is offline  
Old 05-29-2008, 08:35 PM
  #3  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

You can go here and do all the calc.

http://www.wallaceracing.com/Calculators.htm


Zip.
zipper06 is offline  
Old 05-30-2008, 02:57 AM
  #4  
us7race
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Aug 2005
Location: Tell City, IN
Posts: 356
Default

Originally Posted by zipper06
You can go here and do all the calc.

http://www.wallaceracing.com/Calculators.htm


Zip.
That is normally where I go but the link I want to use is broken.. :?
us7race is offline  
Old 05-30-2008, 01:23 PM
  #5  
traysvega
Member
JUNIOR BUILDER
 
Join Date: Jun 2003
Posts: 87
Default

Hey Jody....!!! how the heck have ya been...?Wowy your flyin!!!I'd say a tad less gear will result in 1/2 tenth more in the 1/8 (maybe) and would say with the right gear .......maybe 9.70's low 80's......NICE job dude!!
traysvega is offline  
Old 05-30-2008, 01:32 PM
  #6  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

Originally Posted by us7race
Originally Posted by zipper06
You can go here and do all the calc.

http://www.wallaceracing.com/Calculators.htm


Zip.
That is normally where I go but the link I want to use is broken.. :?
This is the one i used it says 9.88 in the qtr.

Zip.

http://www.wallaceracing.com/8th-quarter.php
zipper06 is offline  
Old 05-30-2008, 03:13 PM
  #7  
bbchevy
Senior Member
RACING JUNKIE
 
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
Default ET

I'll Hang out on the LIMB and say between 9.50 to 9.60?
I'm guessing a 5.67 is the Gear you have Now?So,with a 4.10 you will go past 150mph.........
A 6.33 is the 1/8 Factor for a 9.90 1/4.
By the Picture of you Truck,i would have to say that YOUR FLYING!!!
Later
G 8)
bbchevy is offline  
Old 05-30-2008, 04:51 PM
  #8  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

old door car I had ran 6.15-6.20 it would go 9.6's pretty much all the time.
hammertime is offline  
Old 05-30-2008, 06:04 PM
  #9  
us7race
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Aug 2005
Location: Tell City, IN
Posts: 356
Default

Originally Posted by traysvega
Hey Jody....!!! how the heck have ya been...?Wowy your flyin!!!I'd say a tad less gear will result in 1/2 tenth more in the 1/8 (maybe) and would say with the right gear .......maybe 9.70's low 80's......NICE job dude!!
Hey Tray!! Been awhile. It has 4.88 gears in it now I think I can find a set of 4.56's to try but not 100% Sure. How have you been?
us7race is offline  
Old 05-31-2008, 04:28 AM
  #10  
itsabird
Senior Member
RACING JUNKIE
 
Join Date: Dec 2007
Location: ohio
Posts: 812
Default

i am with the tad less gear guy, short time 60 and 330 look good, 1/8 mph along with e.t., should pickup ( oop,s no pun intended) with 4.56 gear. imo.
itsabird is offline  

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service