oil filters

Old 05-26-2008, 02:00 PM
  #1  
suicidebomb
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: Jul 2007
Location: Independence, Missouri
Posts: 1,188
Default oil filters

Didn't someone say they had cleanable reusable oil filters on here? Do they work as well as the disposable ones? I hope this wasn't a figment of my imagination :lol:
suicidebomb
suicidebomb is offline  
Old 05-26-2008, 03:11 PM
  #2  
jmarksdragster
Senior Member
RACING JUNKIE
 
jmarksdragster's Avatar
 
Join Date: Jul 2007
Location: Florida
Posts: 635
Default

http://www.gopurepower.com/
jmarksdragster is offline  
Old 05-26-2008, 03:41 PM
  #3  
suicidebomb
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: Jul 2007
Location: Independence, Missouri
Posts: 1,188
Default

Thanks Mark
suicidebomb
suicidebomb is offline  
Old 05-27-2008, 11:09 AM
  #4  
edvancedengines
Senior Member
DYNO OPERATOR
 
Join Date: Feb 2006
Location: VA Hospital, Dallas, Tx (214 302 1924) cell-972-464-7400
Posts: 540
Default

None of these Racer Net prices are including freight charges. I can sell at Jobber. Can not post Jobber.

Chevy style screw on
8440 - 38 gpm = net $200.00
A/C & Typical filters for chev 5-7 gpm flow w/paper type filter.
fram hp - 4 rated 9 gal per minute

Ford/Mopar style screw on.
8431 - 22 = net $200.00
Ford/Mpar screw on. 4-6 gpm flow w/ paper type filter.

Remote Filter Systems
8600 - Ford size filter mounting threads gpm 29 = net $299.95
8900 - GM size filter mounting threads gpm 39 = net $329.95

harley davidson
8110 bf - 18 gpm flow Cost same as Chevy.

An example of filtering ability;
Pure Power = 12 micron rated nominal.
coffee filters = 13 micron flow rating
oil filter paper that oil will not flow through = 5 micron

GM sized filter mounting thread = 13/16

Special for racing Remote wix racing - 651222R filter mount thread = 1.50
Rated flow = 21 to 24 gpm contains a 18 psi bypass filer diameter over 4'' in dia

[ if the surface of paper used in oil filters had holes in it like coffee filters do that oil could flow through, the paper would become saturated with oil and pressure would open the holes up bigger. oil dps not flow through paper. It flows by paper and the paper pleaats and indentations and surface grab the dirt and debris. The pressure exits at the end of filter to the center.
edvancedengines is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service