8896 Problem

Old 05-06-2008, 02:00 PM
  #1  
KCRacing2
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Apr 2006
Posts: 3
Default 8896 Problem

I have a 509 bbc roller motor with an 8896 out of the box and I can't get it to run good enough to tune. Sometimes the front pump nozzles work and sometimes they don't. I can get it to run smooth until I get on it and then it starts running bad again, cutting out between 2 & 5 thousand rpms. It responds real good at wot running 8 psi airbleeds out around 1 1/4. Any help would be great. Thanks.
KCRacing2 is offline  
Old 05-06-2008, 03:55 PM
  #2  
jmarksdragster
Senior Member
RACING JUNKIE
 
jmarksdragster's Avatar
 
Join Date: Jul 2007
Location: Florida
Posts: 635
Default

Here we go again. I have an 8896 1050 that had some issues like yours. I also bought a used 1250 to convert the same as you need to do, most likely not a pump issue but an excessively rich mid. I have made mods to my 1050 as well. Read the following and you will understand this is a common Dominator problem.

http://speedtalk.com/forum/viewtopic.php?t=9934
http://www.motorsportsvillage.com/fo...pic.php?t=3283
http://www.motorsportsvillage.com/fo...pic.php?t=3742
http://www.motorsportsvillage.com/fo...pic.php?t=3811
jmarksdragster is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service