rollout??

Old 04-29-2008, 06:17 PM
  #1  
kw89425
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Mar 2007
Location: waynesburg, ky
Posts: 217
Default rollout??

i got my new slicks today from jegs one has 97" and the other has 98" rollout. will this give me problems?
kw89425 is offline  
Old 04-29-2008, 06:25 PM
  #2  
bjuice
Administrator
RACING JUNKIE
 
bjuice's Avatar
 
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,239
Default

it could give you problems by pulling to one side....

you can make up some of the difference by taking the 97 roll out tire and putting the air to it and letting it sit for a while..you are actually stretching the tire..it will work..


brian
__________________
Bjuice..

"I'M YOUR HUCKLEBERRY ! "
bjuice is offline  
Old 04-29-2008, 06:29 PM
  #3  
kw89425
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Mar 2007
Location: waynesburg, ky
Posts: 217
Default

ill give it a try its going to be another couple weeks befor i get the car ready. thanks
kw89425 is offline  
Old 04-29-2008, 09:16 PM
  #4  
gearhead1011
Senior Member
EXPERT BUILDER
 
gearhead1011's Avatar
 
Join Date: Jan 2004
Location: Shepherdsville, KY
Posts: 313
Default

Put an extra 10-15 lbs in it and leave it for a couple of hours then let it down to the same pressure as the other one and recheck the roll out. I think the most difference you want is 3/4 inch but I usually try to get mine within 1/4. This will only work on new tires, once you run them it doesn't work.
gearhead1011 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service