nye's automotive

Old 04-26-2008, 01:14 PM
  #1  
michael1
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Jan 2006
Posts: 237
Default nye's automotive

Has anyone had a motor built by these guys and was not happy with it? I'm thinking about getting a motor built and was looking at dynoflo and ohio crankshaft also. Can anybody help me pick the right one to go with? Thanks
michael1 is offline  
Old 04-26-2008, 03:30 PM
  #2  
bjuice
Administrator
RACING JUNKIE
 
bjuice's Avatar
 
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,239
Default

Nye's out of the three..

where do you live ?..if you were considering going some distance for your motor i like PAR Racing Engines out of S.C. ( Scott Duggins is the onwer)..864-578-5622...His 565's with oval port heads are makng right at the 1050hp range..and they running these things round,after round after round..with no problems and minimum maintenance other than the preventive norm....

just my 2 cents.
__________________
Bjuice..

"I'M YOUR HUCKLEBERRY ! "
bjuice is offline  
Old 04-26-2008, 03:45 PM
  #3  
jmarksdragster
Senior Member
RACING JUNKIE
 
jmarksdragster's Avatar
 
Join Date: Jul 2007
Location: Florida
Posts: 635
Default

Reher Morrison.
jmarksdragster is offline  
Old 04-26-2008, 05:38 PM
  #4  
michael1
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Jan 2006
Posts: 237
Default

I live in Louisiana, I'm looking to build a big chief motor, I already have a square port tunnel ram with two 1150's. The intake is for 18 degree heads so I plan on going with brodix pb1802 with titanium intake valves and the intake is already drilled for a fogger system. This will be in a drag radial car weighing about 3400 lbs.
michael1 is offline  
Old 04-26-2008, 06:58 PM
  #5  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

I have a Nye's 582 in my car and know Pat (one of the owners) personally he is a heck of a nice guy and wont do you wrong ! DO NOT buy from Dynoflo. Nyes stuff works good and prices are great ! Machine work is top notch !
hammertime is offline  
Old 04-26-2008, 07:03 PM
  #6  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,143
Default

Read this thread and you won't even think about dyno-blow

http://forums.racingjunk.com/viewtop...hlight=dynoflo
Tod74 is offline  
Old 04-26-2008, 07:53 PM
  #7  
michael1
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Jan 2006
Posts: 237
Default

Thanks, I spoke with Pat the other day but just wanted to hear what everyone had to say. He seemed to be a honest and helpful guy but it never hurts to be safe. I guess he will be the one doing my motor. Thanks for all the input.
michael1 is offline  
Old 04-27-2008, 03:52 AM
  #8  
johnracer
Senior Member
DYNO OPERATOR
 
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
Default

ReherMorrison....
johnracer is offline  
Old 04-27-2008, 06:36 AM
  #9  
michael1
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Jan 2006
Posts: 237
Default

reher morrison told me they won't make anything larger than 620 inches
michael1 is offline  
Old 04-27-2008, 08:18 AM
  #10  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,143
Default

Originally Posted by michael1
reher morrison told me they won't make anything larger than 620 inches
:shock:
Tod74 is offline  

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service