Is this the right combination?

Old 04-03-2008, 06:41 PM
  #1  
kmcclain
Junior Member
JOURNEYMAN
Thread Starter
 
Join Date: Jan 2008
Posts: 29
Default Is this the right combination?

I have a 468 BBC 4 bolt main, GM steel crank 4" stroke, eagle H beams 850 HP 7500RPM, srp pistons 48cc dome, doug herbert mach roller, 698 700 lift 269 277 @50 305 310 108 LC, AFR 335 cnc heads 2.30 1.88 121cc chamber, 1150 holly dominator, 2speed pg tranny brake,tubbed 83 camaro 32" tall tires and 433 gears. I want to run 8.60 in the 1/4. Please inlighten me on my set up.
kmcclain is offline  
Old 04-03-2008, 06:56 PM
  #2  
suicidebomb
Senior Member
RACING JUNKIE
 
Join Date: Jul 2007
Location: Independence, Missouri
Posts: 1,188
Default

Whats your car weigh?
suicidebomb is offline  
Old 04-03-2008, 07:47 PM
  #3  
topcat572
Senior Member
MASTER BUILDER
 
Join Date: Nov 2004
Location: Port Sulphur, La.
Posts: 139
Default times

Its been quite a few yrs ago, I had a all glass 84 firebird that weighed 2350 wet with a 468 that made 714 hp, ran 9.0s at 151. What are You using to figure the 850 hp?
topcat572 is offline  
Old 04-03-2008, 08:36 PM
  #4  
bbchevy
Senior Member
RACING JUNKIE
 
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
Default EST

Better have about a 250HP Plate Kit under that 1150,to run the # you are after!
later
G 8)
bbchevy is offline  
Old 04-03-2008, 09:01 PM
  #5  
mopar1968
Senior Member
RACING JUNKIE
 
mopar1968's Avatar
 
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,579
Default

My brother run's a 1986 dodge daytona, 2450 with him in it, 604 indy hemi with sheetmetal intake, 2 1050 with 200 shot, powerglide, dana60 with 4.56, 16x33, run's 8;40 1/4, if this combo helps.
mopar1968 is offline  
Old 04-03-2008, 11:46 PM
  #6  
cepx111
Senior Member
RACING JUNKIE
 
Join Date: May 2006
Posts: 2,044
Default Re: times

Originally Posted by topcat572
Its been quite a few yrs ago, I had a all glass 84 firebird that weighed 2350 wet with a 468 that made 714 hp, ran 9.0s at 151. What are You using to figure the 850 hp?
I think that he was refering to the rods rated HP.
I'm with BBCHEVY on this one, your gonna need lots of spray to get them numbers.
Your particular combo will net you about 700 to 750 poines.

Goodluck<Charles
cepx111 is offline  
Old 04-04-2008, 03:25 AM
  #7  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default Re: EST

Originally Posted by bbchevy
Better have about a 250HP Plate Kit under that 1150,to run the # you are after!
later
G 8)
I am going to agree with this but say a 150hp kit some 468's can be made to fly if you get luck you'll get into the 8's any idea car weight ?
hammertime is offline  
Old 04-04-2008, 06:21 PM
  #8  
kmcclain
Junior Member
JOURNEYMAN
Thread Starter
 
Join Date: Jan 2008
Posts: 29
Default car weight

fiberglassed 83 irock 2650 with me in it.
kmcclain is offline  
Old 04-08-2008, 06:36 AM
  #9  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,143
Default

you need 823.4520390598471 Horsepower to run 8.60 in 1/4 in a 2650lb car...
http://www.mindspring.com/~steveflye...hp_from_et.htm
Tod74 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service