1.6 to 1 rockers under stock valve covers???

Old 03-26-2008, 07:47 PM
  #1  
hughesis21
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Oct 2007
Location: tn
Posts: 18
Default 1.6 to 1 rockers under stock valve covers???

i have a 97 vortech 350, i know that the stock pushrods are weak and i am wanting to put 1.6 rockers in it. i am told by a local "crooked" machine shop that i will have to buy tall valve covers. theres a problem with that. i have put this motor in a 97 s10 everything done right i used the factory wireharness its still fuel injected just rewrote the cpu. its all factory lookin i even have my air cond. i do not believe i can put tall valve covers in there. i have to take fenders off just to change plugs!
hughesis21 is offline  
Old 03-26-2008, 08:27 PM
  #2  
johnracer
Senior Member
DYNO OPERATOR
 
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
Default

They should clear stock valve covers. The real issue is the hole in the head that the pushrod comes up through. A 1.6 rocker has the pushrod seat relocated closer to the stud to change the ratio. The hole in the head may have to be elongated to gain the necessary clearance.....
johnracer is offline  
Old 03-26-2008, 09:27 PM
  #3  
mopar1968
Senior Member
RACING JUNKIE
 
mopar1968's Avatar
 
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,579
Default rockers

If it helps you i have a small block mopar and i have 1.7 roller rockers on it.
mopar1968 is offline  
Old 03-26-2008, 10:02 PM
  #4  
sds10racer
Senior Member
MASTER BUILDER
 
Join Date: Jan 2007
Location: winner sd
Posts: 196
Default

what johnracer said. i've got the same set up in my pu and the guy that put the engine together before me didn't open up the push rod guides. there was a little wear on the push rods. i opened em up when i had the heads off last year. the only time i think you'll need the tall covers is when you put a girdle on.
sds10racer is offline  
Old 03-26-2008, 10:43 PM
  #5  
cbtlr
Senior Member
SENIOR BUILDER
 
Join Date: Apr 2007
Posts: 105
Default

Are we talking non roller 1.6's or rollers?I just went to full rollers on a sbc with no girdle and had to get spacers for covers.I'm not a engine guru.But I did have my exp with full rollers and valve cover clearance.
cbtlr is offline  
Old 03-27-2008, 09:32 PM
  #6  
sds10racer
Senior Member
MASTER BUILDER
 
Join Date: Jan 2007
Location: winner sd
Posts: 196
Default

mine are crane gold self aligning 1.6.
sds10racer is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service