Need NOS Help

Old 03-18-2008, 06:58 PM
  #1  
hpleader
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Apr 2007
Posts: 4
Default Need NOS Help

I want to run a 50-100hp shot of nos on my engine. My only concern is that nothing is forged. I run a set of cast rings, hyper. pistons, shot peened rods, and a NF crank on a 4bolt main chevy block. I t is around 10.25 compression with an 800AVS thunderseries Edelbrock carb, team g intake and all msd ignition. Will this work???? Some people say yes as long it isnt over 100 others say goodnite to engine. Anyone experiment with this???

HPLEADERS
hpleader is offline  
Old 03-19-2008, 03:13 AM
  #2  
johnracer
Senior Member
DYNO OPERATOR
 
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
Default

As long as it's mechanically sound, you have an adequate fuel pump, and you have all the safety switches, it should be fine. JMO
johnracer is offline  
Old 03-19-2008, 08:20 AM
  #3  
OneBadGMC
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Location: Belleville, IL
Posts: 658
Default

You can push as much as you want through it, so long as it doesn't detonate.

If you get detonation once, it'll knock the skirts off of the pistons.
OneBadGMC is offline  
Old 04-09-2008, 05:28 PM
  #4  
prostreet1972
Member
JOURNEYMAN
 
Join Date: Jan 2008
Location: Newcomerstown, OH
Posts: 33
Default

I have a stock bottom end 350 with stock flattop pistons, stock rods, stock bore. Around 10:1 compression, team G, double hump heads and mild cam, 750 DP with proform body and have ran 100 shot sniper kit with no problem. I hooked up an air/fuel ratio guage and tuned my carb to be a little on the rich side. Running one holley blue pump at about 8 psi, 110 octane. Running the regular WOT switch to send power to silenoids and MSD digital window switch to send the ground to activate system. Going to the 150 shot and Lunati bracket master cam this year, hopefully it will stay together.
prostreet1972 is offline  
Old 04-10-2008, 06:01 PM
  #5  
mopar1968
Senior Member
RACING JUNKIE
 
mopar1968's Avatar
 
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,579
Default

I ran a 150 shot on a small block with stock bottom end for years, just make sure you have fuel supply, and install a safety switch so it will cut the nos if fuel pressure drops. you should be allright. 8) 8)
mopar1968 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service