need a glide to handle 1500+ hp, what do I need?

Old 03-15-2008, 05:13 PM
  #1  
ccso640
Member
JOURNEYMAN
Thread Starter
 
Join Date: Aug 2005
Posts: 30
Default need a glide to handle 1500+ hp, what do I need?

Building a blown alcohol 572 Ford for bracket and some heads up racing. Motor has a 14-71 SSI blower and will be making about 20 pounds of boost. Car is a 65 Fastback tube chassis about 2600 pounds. Have a BTE turbo spline converter that was behind a blower motor and the glide I was using with a carbed motor which has a hardened TCI Turbo shaft, 1.76 gear, JW Bell, Pro Tree brake, handled 800 hp no problem. Do I need to ditch the brake for a blown combo? Not big on transmission stuff, just engines so trying to get an idea of what I need to do to make this tranny stay together. Car will be running mid to low 7's if not faster. Thanks!! Chris
ccso640 is offline  
Old 03-15-2008, 05:38 PM
  #2  
jmarksdragster
Senior Member
RACING JUNKIE
 
jmarksdragster's Avatar
 
Join Date: Jul 2007
Location: Florida
Posts: 635
Default

A good aftermarket gearset. Transmission Specialties has a new input shaft made of "NASA" material. At least 7 or 8 thin Alto clutches, couple companies have a 10 clutch drum available. 1500 horse might dip 6's.
jmarksdragster is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service