9 inch axles respline?

Old 03-09-2008, 07:14 PM
  #1  
liljon
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Apr 2005
Posts: 10
Default 9 inch axles respline?

does anyone know who can respline axles in ohio?or anywhere?
9 inch ford 28 spline
and how much does it cost?
liljon is offline  
Old 03-10-2008, 09:57 AM
  #2  
hvychvy
Junior Member
JOURNEYMAN
 
Join Date: May 2007
Location: Pfafftown , NC
Posts: 28
Default

moser in Indiana,best price, good job, fairly good turn around time about 2 weeks.
hvychvy is offline  
Old 03-12-2008, 09:18 AM
  #3  
hotrodharley
Senior Member
EXPERT BUILDER
 
Join Date: Dec 2002
Location: spring creek nv.
Posts: 328
Default

last time i had axles respline was a few years ago but mosser did them and did a very nice job..if i remember right it was $85.00 per axle but been a few years so i'm sure price is higher now..there is some nice aftermarket axles out there now that isn't much more in price..i didn't use respline axles with slicks but did use them back then for a street pro/street builds with the old hard m/t tires[steam rollers]
hotrodharley is offline  
Old 03-12-2008, 11:56 PM
  #4  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default Re: 9 inch axles respline?

Originally Posted by liljon
does anyone know who can respline axles in ohio?or anywhere?
9 inch ford 28 spline
and how much does it cost?
I wouldn't do it, you can buy alloy axles for $300.00 to any length and a lot stronger than stock axles resplined.

Here's the site.

http://www.quickperformance.com/ads.htm

JMO

Zip.
zipper06 is offline  
Old 03-13-2008, 08:40 PM
  #5  
olds48
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Location: Montvale, VA
Posts: 1,431
Default

My Moser's were $316 for the pair.I don't believe I would do it.Good axles are just too cheap to risk it.But I also ran high 6s(1/8 mile) on a 10 bolt with stock 28 spline axles,carrying a front tire for about 20 feet,with no problems(or c-clip eliminators :shock: )I'd still buy good axles.Just my opinion
olds48 is offline  
Old 03-14-2008, 10:13 AM
  #6  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,143
Default

Originally Posted by olds48
My Moser's were $316 for the pair.I don't believe I would do it.Good axles are just too cheap to risk it.But I also ran high 6s(1/8 mile) on a 10 bolt with stock 28 spline axles,carrying a front tire for about 20 feet,with no problems(or c-clip eliminators :shock: )I'd still buy good axles.Just my opinion
You didn't think too much of your quarter panels did ya?
Tod74 is offline  
Old 03-14-2008, 02:24 PM
  #7  
olds48
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Location: Montvale, VA
Posts: 1,431
Default

:shock: Never thought of that.Seriously, never crossed my mind.Ouch,that woulda sucked.Hard to find replacement panels for a 48 Olds. :shock:
olds48 is offline  
Old 03-15-2008, 08:05 AM
  #8  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,143
Default

Originally Posted by olds48
:shock: Never thought of that.Seriously, never crossed my mind.Ouch,that woulda sucked.Hard to find replacement panels for a 48 Olds. :shock:
seen a guy break an axle on a 71 El Camino on the street just driving down US 31 and it ripped up the whole side of bed.
Tod74 is offline  
Old 03-15-2008, 09:58 PM
  #9  
sds10racer
Senior Member
MASTER BUILDER
 
Join Date: Jan 2007
Location: winner sd
Posts: 196
Default

see that on ford farm pu all the time around here. using 1/2 tons for 1 tons
sds10racer is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service