Header Question on a 632

Old 03-09-2008, 03:53 PM
Thread Starter
Join Date: Nov 2005
Location: Baltimore
Posts: 30
Default Header Question on a 632

I have a 72 Chevelle ansd am putting together a 632 10- 1/2 to 1
motor. with the tall deck what headers do I need will hooker Super Comp work or do I need special Headers.
blaserman is offline  
Old 03-11-2008, 07:32 AM
Join Date: Jan 2004
Location: Wisconsin
Posts: 65
Default Headers

What heads are you running on the engine? With the T/D and any head with a raised exh. port you are going to have some problems. If the front stub has been done you have a better chance of getting some to fit.

But be ready to change a few tubes, it may be your only hope. Super Comps. in my Nova 540 T/D .400 raised exh. port We changed 4 tubes, and the front stub was done. Plated, crossmember cut, and a rack.

You can try Kooks, or Lemons they may have something that might work? But they will cost almost as much as a fabbed set will run you.

Good Luck
sc3314 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service