U-weld it sheet metal intake kits

Old 03-05-2008, 05:57 AM
  #1  
racecrafter
Junior Member
JOURNEYMAN
Thread Starter
 
Join Date: Feb 2008
Posts: 29
Default U-weld it sheet metal intake kits

Looking to replace the two dominator sheet metal intake that was stolen from my shop.....saw on racing junk the company selling kits that can be welded by the buyer. has anyone run one of this company's intakes either in a pre-welded version or purchased a weld it your self version and completed it?
It is going to be used on a 632 nitrous motor .....big chief heads...the usual junk.....
racecrafter is offline  
Old 03-05-2008, 03:15 PM
  #2  
Racefab57
Senior Member
DYNO OPERATOR
 
Join Date: Nov 2006
Location: NC
Posts: 557
Default

Who has the kit your interested in???? David.
Racefab57 is offline  
Old 03-06-2008, 03:56 AM
  #3  
racecrafter
Junior Member
JOURNEYMAN
Thread Starter
 
Join Date: Feb 2008
Posts: 29
Default

the company/web site is Weinlemotorsports.com.....they have an add in the drag race engine parts classified section of this (RacingJunk)site
racecrafter is offline  
Old 03-06-2008, 05:11 AM
  #4  
gimmemud
Senior Member
MASTER BUILDER
 
Join Date: Apr 2006
Location: Ms.
Posts: 191
Default

Here is one ready to go almost as cheap as the u weld kit

http://www.racingjunk.com/post/11404...AL-INTAKE.html

This is not my ad, just something I found
gimmemud is offline  
Old 03-06-2008, 03:58 PM
  #5  
racecrafter
Junior Member
JOURNEYMAN
Thread Starter
 
Join Date: Feb 2008
Posts: 29
Default

thanks, I am keeping that add in mind but I would have to make spacers and would rather not if i dont have to.....but again thank you.
racecrafter is offline  
Old 03-07-2008, 06:11 AM
  #6  
gimmemud
Senior Member
MASTER BUILDER
 
Join Date: Apr 2006
Location: Ms.
Posts: 191
Default

Keep in mind if you do the uweld kit, there is some serious porting that will have to be done also. I considered that route, but instead went with Beck Mechanical in Houston Tx. for a new one.

His website is WWW.Beckmechanical.com
gimmemud is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service