Comp Test question

Old 03-03-2008, 02:23 PM
  #1  
dtperformance
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: Sep 2003
Posts: 105
Default Comp Test question

I check cly pressure on my motor today getting it ready for the blower. the motor is a 8 to 1 motor. it was 112-120 across the board and was built for lots of boost. this is low but is does this sound right.
dtperformance is offline  
Old 03-03-2008, 10:26 PM
  #2  
triniemi
Member
JUNIOR BUILDER
 
Join Date: May 2007
Posts: 83
Default

The most important thing is that they are even. If there where one cylinder with 80 or less, you would have a problem. That thing can take a lot of boost.
triniemi is offline  
Old 03-04-2008, 07:01 AM
  #3  
dtperformance
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: Sep 2003
Posts: 105
Default

Yes it was. It was surpose to get a really big turbo but I dont have time to finish that so I just ordered a blower so it could be done for this weekend for the pinks all out
dtperformance is offline  
Old 03-17-2008, 01:04 PM
  #4  
slowford1
Junior Member
SHOW GUEST
 
Join Date: Feb 2007
Posts: 1
Default comp .test ?

what is the best way to check comp. on the motor and if i get a 175 or more reading those that meen i have high comp.
slowford1 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service