Ballancing

Old 03-01-2008, 11:47 AM
  #1  
dgordner
Member
JUNIOR BUILDER
Thread Starter
 
Join Date: Sep 2003
Location: Watsontown Pa.
Posts: 73
Default Ballancing

If I have my rods resized (they are anywhere from .001 to .0015 out of round), will I need to get them reballanced if they were previously ballanced? Question # 2: How close are the Ross Pistons from the factory to being ballanced for an engine that will be turning 7200. (circle track) I ask this question because of the cost of the pistons being expensive.
dgordner is offline  
Old 03-01-2008, 04:50 PM
  #2  
performanceengin
Member
JUNIOR BUILDER
 
Join Date: Oct 2005
Location: ohio
Posts: 94
Default

reconing your rods will not change balance enough to worry about. changing pistons is a different story unless they weigh the same as you'r old pistons
performanceengin is offline  
Old 03-02-2008, 07:24 AM
  #3  
engineaction
Junior Member
APPRENTICE
 
Join Date: Jan 2005
Location: Rochester, Minnesota
Posts: 13
Default

If you are looking for a specific weight call Ross pistons and give them the weight, and what # cylinder of your piston, they will set you up with what you need. If you need help feel free to give us a call, we carry Ross Racing Pistons. The resizing of the rods isn't very critical, unless they switched rod bolts.

Josh
www.actionengineering.net
engineaction is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service