who are we today?nitro joe nitrodude or hemituner

Old 02-16-2008, 07:49 AM
  #1  
baley
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Jun 2007
Posts: 5
Default who are we today?nitro joe nitrodude or hemituner

same phone number same location maple view ny.same phone number and location of dick gaylord who my check was made out to.
after getting locals cops and the ny da involved.i received a block 2 heads a crank and a few other parts.dont forget i sent you full payment $3000. next day air .
im still trying to get the bottom end and valve train from him.
dozens of phone calls .this deal been going on since end of november 07 and getting its a little old.if you have the parts send them if you dont tell me so i can take care of it another way..
also heads up guys on other sites racingjunk/insidetopalcohol/funnycar classics. he goes by ntfdick on funnycar classics.
nitrojoe or do you go by nitrodude or now do you go by hemituner on racingjunk.com ? what is it so people dont get burned like i am.same phone number same mapleview ny location.
dick gaylord .
motor is worthless to me if you dont get my parts here.
seeing the law get more involved priceless.
get me my flippen parts to me!
baley is offline  
Old 02-16-2008, 11:42 PM
  #2  
nitrojoe
Junior Member
SHOW GUEST
 
Join Date: Mar 2003
Posts: 2
Default none of the above

Yes , none of the above usernames as far as you or this board is concerned

our transaction is a private transaction , not generated thru this board
Why don't you tell the WHOLE STORY here , How the deadline was originally to be in Jan or Feb , meeting you halfway in Ohio to transfer this order .

Why don't you tell this board how compassionate you are ?
Such as when you were aware that I was sick in bed from the monday after thanksgiving for six weeks all thru the Holiday season , You tried to jam me up with a bunch of deadlines ,you knew I couldn't meet , due to the amount of machine work which had to be done .

Why don't you list ALL the items which you have received ?

GM High Performance 4 bolt block & main caps ,filled with hardblok to bottom of deck , reconditioned to .030 o.s. & honed , " Bore decks " O " ringed w / stnls wire , w/ freeze plugs , cam bearings ,block galley plugs , rear cam plug ,valley screens .
Cast iron GM cylinder heads , semi-open chamber , NEW bronze guides installed & reamed , exhaust pockets / seats enlarged to
1.880 , Complete valve job , decks milled .
8 Titanium Intake valves , 8 stainless Exhaust valves .
racing guide plates & rocker arm studs .
GM Steel 3.750 Stroke Crankshaft , rod jounal .010 , main journal .010 , polished , oil holes radiused , snout broached for double length i/4" keyway .
Weiand Blower Manifold .
SCE Dead Soft copper head gaskets . ( new )
Set racing intake gaskets . ( new )
gasket set w/ front & rear seals . ( new )
16 stainless rocker arms w/ poly locks .
SFI powerglide flywheel.
Set .010 main bearings . ( new )

Brand New Milodon Funny Car Pan

above items mcauley has received aka baley on here

Why don't you just open right up and say we had a conversation early this week , and I assured you , I would have another shipment of your parts out by the end of this week ?

Why , I'll tell why , Then your statements above would have no foundation , Would they ?
You were notified of this shipment today , along with the tracking number.

Your words when you received the block, heads , and parts -------
" NICE BLOCK , NICE HEADS , NICE MANIFOLD !!!"
Your words when you received the Brand New Mildon Pan " NICE PAN "
You weren't supposed to get a NEW pan you were to get a used pan .

I did email you when I was sick and tell you , you would get MORE than you bargained for didn't I

You weren't to get titanium valves either were you ?

I see no reason why you are on here , but you have good reason ??

You think I'm not interested in getting this over , get a life
nitrojoe is offline  
Old 02-17-2008, 06:23 AM
  #3  
Scorpion1110
Senior Member
RACING JUNKIE
 
Join Date: Jun 2007
Location: Standing right behind you
Posts: 1,210
Default

So is hotrodfl the same as baley?

The Mods can check their static IP addresses and verify that.

If not then either folks are ganging up on Nitrojoe, or there are two separate customers under two separate posts who feel that they have issues.

Not sure exactly what to think, but without more information, can't and shouldn't take sides.

Later.
Scorpion1110 is offline  
Old 02-21-2008, 08:03 AM
  #4  
baley
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Jun 2007
Posts: 5
Default DICK GAYLORD

LIST MY PARTS I RECIEVED?SEND ALL MY PARTS LIKE EVERYBODY ELSE WOULD ON THIS SITE.WHAT YOU WANT A PAT ON THE BACK FOR A PARTIAL SHIPPMENT? AGAIN ANOTHER BOX SHOWS UP NOT COMPLETE.
TODAY THURSDAY 2-21 08 YEP STILL MISSING PARTS . JUST FINISH OUT THE PARTS YOU OWE ME AND GET IT OVER WITH .YOUVE HAD MY MONEY SINCE NOVEMBER .
baley is offline  
Old 02-21-2008, 09:04 AM
  #5  
baley
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Jun 2007
Posts: 5
Default DICK GAYLORD

"Yes , none of the above usernames as far as you or this board is concerned "
WHAT THE HELL DO I CARE ABOUT YOUR CONCERNS.
IM LOOKING OUT FOR EVERYBODY ELSE ON THIS SITE.
MY EMAIL IS FULL OF YOUR BAD DEALINGS.WHO YOU ARE YOU FOOLIN FIRST TIME YOUVE HEARD OF THESE .
I KNOW THATS BS.HOW ELSE DID I KNOW TO CONTACT THE
Oswego County Sheriff's Office
Public Safety Center
39 Churchill Road
Oswego, NY 13126

WHY IS THE BOARD LETTING YOU HAVE ALL THESE DIFFERANT NAMES.
baley is offline  
Old 03-16-2008, 05:32 AM
  #6  
farrigno
Junior Member
JOURNEYMAN
 
Join Date: Sep 2007
Location: mass
Posts: 29
Default

did this deal ever get settled?? is this the same guy as promodjoe? just wondering, caus i see ads by a guy named promodjoe, and don't want to get scammed,if its the same guy and the deal didn't get settled,it would be a great addition if people would follw through with their dealings.
farrigno is offline  
Old 03-24-2008, 08:51 PM
  #7  
baley
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Jun 2007
Posts: 5
Default gaylord

yea this deal is done .this deal was a f in joke from day one.lost this lost that couldnt fine this wrong parts excuses for everything .$3 grand .what a piece of sh#t take your pick.biggest mistake ive ever made.id stay away from this guy.
baley is offline  
Old 03-25-2008, 04:15 PM
  #8  
farrigno
Junior Member
JOURNEYMAN
 
Join Date: Sep 2007
Location: mass
Posts: 29
Default

damn baley, sorry to hear that.
farrigno is offline  
Old 03-26-2008, 06:08 AM
  #9  
vegafunnycar
Junior Member
SHOW GUEST
 
Join Date: Jun 2005
Posts: 8
Default

Dick,take care of this man.He paid you now do your end of the deal.

ps,take care of my friend brian too,remember him,he was the guy that sent you stuff to trade and you gave him nothing in return.
vegafunnycar is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service