drive line to trany angle

Old 02-11-2008, 08:53 PM
  #1  
kmcclain
Junior Member
JOURNEYMAN
Thread Starter
 
Join Date: Jan 2008
Posts: 29
Default drive line to trany angle

what the best angle from tranny to driveline angle? mine looks like 5 degrees is that to much?
kmcclain is offline  
Old 02-12-2008, 07:49 AM
  #2  
bjuice
Administrator
RACING JUNKIE
 
bjuice's Avatar
 
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,239
Default

1st off is it a ladder bar or 4 link ?

where are you taking your measurement from ?

i would say 5 degree of pinion is too much on any drive line..

4 links can get away with 1 degree up to 2-2.5 ( max).. ( less is better)

i cannot make anymore comments about your set up until you tell us more .

Brian
__________________
Bjuice..

"I'M YOUR HUCKLEBERRY ! "
bjuice is offline  
Old 02-12-2008, 06:58 PM
  #3  
kmcclain
Junior Member
JOURNEYMAN
Thread Starter
 
Join Date: Jan 2008
Posts: 29
Default tranny to drive line

My camaro is a 4 link, i just got the car and it was all ready set up, they took out the small block and put a BB in it with motor and mid plate the back of the engine looks like its going down hill, then when you look under the car that reflects onto the driveline to tranny angle, the pinion angle looks pretty good, but i dont know how to check one.
kmcclain is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service