Will it work? 305 heads on a 350?

Old 02-01-2008, 02:27 PM
Junior Member
Thread Starter
Join Date: Nov 2007
Posts: 16
Default Will it work? 305 heads on a 350?

I had a 305 that blew up. I was left with a set of 305 heads that only had 50 laps on them. They were fresh from the machine shop. They had a new valve job and had been milled .010 . I have a stock 350 (with out heads) that i want to put them on. I have heard good and bad about doing this. I am racing in a enduro class, where the engines have to be stock. Dont have the money to buy 350 heads. Will this work? I was also told i could install 194 valves.
BD74SS is offline  
Old 02-01-2008, 04:07 PM
Senior Member
Join Date: Dec 2005
Location: berea,ky
Posts: 184
Default heads

I know of some guys that have used 305 heads on 400ci.So it should work fine on a 350ci.
lanham is offline  
Old 02-01-2008, 04:11 PM
Senior Member
Join Date: Nov 2007
Location: Wisconsin cheesehead!!
Posts: 213

do what you gotta do to race! that will work fine, just wount have the same performance as a set of 202 heads for a 350.
v8Fiero is offline  
Old 02-10-2008, 06:01 PM
Senior Member
Join Date: Apr 2003
Location: Brookings South Dakota
Posts: 244

All small block heads are interchangeable; one thing to look for on the 305 heads is some of the chambers are 58cc, so they will raise the compression ratio.
cncmotorsports is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service