how do i non-ecu my 92?

Old 01-23-2008, 07:09 PM
Junior Member
Thread Starter
Join Date: Nov 2007
Location: hickory,n.c.
Posts: 12
Default how do i non-ecu my 92?

i have a 92 camaro im putting a 383 stroker in. What is the best way to bypass my computer and keep my gauges working. im dying to get all those ugly wires off my car.
chrishester1224 is offline  
Old 01-30-2008, 10:57 PM
Senior Member
Join Date: May 2006
Posts: 2,044

As far as wiring up the HEI distributor, that's as easy as running a 16 gage wire from your ignition switch to the new HEI dist, but the tach is fed from your old dist, so you'll need to find a wiring diagram for your car and find out which wire feeds the tach then simply hook it up to the tach output on the new HEI dist. If your not using any of the computer controlled junk anymore you wont need about 2/3 of the wires currently under the hood, so refer to that wiring diagram again and find the wires that feed your gauges like, E>I. engine coolant temp sending unit and oil pressure gauge sending unit, amp gauge and or alternator light etc, then cut and toss the rest.

Goodluck, Charles
cepx111 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -