grooves in head

Old 01-16-2008, 09:28 PM
  #1  
sds10racer
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Jan 2007
Location: winner sd
Posts: 196
Default grooves in head

check this site out: www.somender-singh.com. looks like if it works like they say it should increase the mid range torque but hurts the higher rpm. seems to be like the flame slot in dome pistons?
sds10racer is offline  
Old 01-16-2008, 09:59 PM
  #2  
fishman1
Senior Member
MASTER BUILDER
 
Join Date: Dec 2005
Location: alberta,canada
Posts: 166
Default

There is a guy who i know that swears by this and is doing it to everything he owns..........dirt bikes,snowmobiles,trucks etc............he has no high horse power motors but works great on what he has and improves the gas mileage to......what i read on it is that it improves bottom end and mid range power to 4500 rpm
fishman1 is offline  
Old 01-17-2008, 04:03 AM
  #3  
cepx111
Senior Member
RACING JUNKIE
 
Join Date: May 2006
Posts: 2,044
Default

Looks like a good place for a crack to form....

><Cp
cepx111 is offline  
Old 01-17-2008, 05:36 AM
  #4  
bjuice
Administrator
RACING JUNKIE
 
bjuice's Avatar
 
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,239
Default

i'll pass for Now :shock:
__________________
Bjuice..

"I'M YOUR HUCKLEBERRY ! "
bjuice is offline  
Old 01-17-2008, 08:29 AM
  #5  
fishman1
Senior Member
MASTER BUILDER
 
Join Date: Dec 2005
Location: alberta,canada
Posts: 166
Default

Sorry but missed some info as the notches might work on street use, they will not work for drag application as the gain is in the low rpm's like under 4500 rpm.............like i said the guy i know swears by it but in his case is low horse power units were he is actually after the gas mileage more then anything else...i know he told me on his chevy v8 truck he gained close to 5 miles per gallon........so take for what ever its worth i am not doing it either
fishman1 is offline  
Old 01-17-2008, 06:43 PM
  #6  
sds10racer
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Jan 2007
Location: winner sd
Posts: 196
Default

yeah, i don't think i'd do it to an engine that's worth putting in anything i want to drive. but it gives you something to think about anyway.
sds10racer is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service