looking to build a stroker

Old 01-14-2008, 04:01 PM
  #1  
redzee
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Nov 2006
Posts: 4
Default looking to build a stroker

Looking for a good recipe, to build a 600 hp small block chevy on pump gas.... any help would be great ..
redzee is offline  
Old 01-14-2008, 04:32 PM
  #2  
redzee
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Nov 2006
Posts: 4
Default

No spray....
redzee is offline  
Old 01-14-2008, 05:00 PM
  #3  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

A 406ci motor should do it without much effort, 383 would also. Will this be a street motor or what ? Pump gas ?
hammertime is offline  
Old 01-14-2008, 05:56 PM
  #4  
redzee
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Nov 2006
Posts: 4
Default

street/strip .. was basically looking for wich rods ,pistons,crank,heads, etc Thanks for the reply..
redzee is offline  
Old 01-15-2008, 05:38 AM
  #5  
Pwmax
Senior Member
MASTER BUILDER
 
Join Date: Jul 2006
Posts: 184
Default

Just built one. 406, Scat cast steel crank, Scat H-beams, Srp pistons, Pro-1 Platinumn 230's with a bit of work, mild solid roller, Super Vic, QF 950carb. 615hp and 540 ft/lbs on pump gas

Frank
Advanced Performance
www.get-ap.com
Pwmax is offline  
Old 01-15-2008, 11:49 AM
  #6  
curtisreed
Senior Member
RACING JUNKIE
 
curtisreed's Avatar
 
Join Date: Feb 2004
Location: KIEFER, OK.
Posts: 1,311
Default

Originally Posted by Pwmax
Just built one. 406, Scat cast steel crank, Scat H-beams, Srp pistons, Pro-1 Platinumn 230's with a bit of work, mild solid roller, Super Vic, QF 950carb. 615hp and 540 ft/lbs on pump gas

Frank
Advanced Performance
www.get-ap.com
Would you mind if I ask the compression ratio on this? Thank.

Curtis
curtisreed is offline  
Old 01-15-2008, 03:03 PM
  #7  
redzee
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Nov 2006
Posts: 4
Default

Is that on pump gas ? what size bore and stroke? thanks in advance for youre help.. I see you have a website can you sell me all prts?
redzee is offline  
Old 01-16-2008, 02:45 PM
  #8  
altune
Senior Member
MASTER BUILDER
 
Join Date: Oct 2003
Posts: 144
Default

I had a sbc stroker built with Compstar components and I was pretty happy. It's made overseas but final machining is dome by calais.
4" stroke 4.155 bore is a good combo. compression should be no more than 10-1 for pump gas, Brodix track ones ( cnc) should make 650 hp on that setup.
Al
altune is offline  
Old 01-16-2008, 05:57 PM
  #9  
poncholvr
Senior Member
MASTER BUILDER
 
Join Date: Jan 2008
Posts: 146
Default

are you wanting to stroke it- or (de)stroke it?
like a 400 chevy crank in a 350-
or a 350 crank in a 400- with a long rod ,and custom pistons?
a 350 is only borable to how much? :idea:
poncholvr is offline  
Old 01-19-2008, 05:14 AM
  #10  
russ67chevelle
Senior Member
EXPERT BUILDER
 
Join Date: Jan 2005
Posts: 336
Default

im guessing 12 to 1 compression!perhaps more...
russ67chevelle is offline  

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service