MSD ignition wire

Old 12-20-2007, 06:34 PM
  #1  
Superpro399z
Member
JOURNEYMAN
Thread Starter
 
Join Date: Sep 2004
Location: Galveston,Indiana
Posts: 33
Default MSD ignition wire

Switching from magneto to a MSD 7Al-2 ignition box. My question is how and where do I run my ignition wire off the MSD to the Painless control panel? Any help would be appreciated! Do I run it to the starter button or the ignition button on the panel! Thanks Mike :?:
Superpro399z is offline  
Old 12-20-2007, 11:16 PM
  #2  
gdmii
Senior Member
MASTER BUILDER
 
Join Date: Oct 2004
Location: Newport News, VA
Posts: 139
Default

Run the igntion wire to the ignition switch on the panel then to a 12v source. Run a separate wire from 12v to the starter button then to the neutral safety switch on your shifter then to the starter solenoid. You can go to MSD's website and download wiring diagrams.

George
gdmii is offline  
Old 12-20-2007, 11:42 PM
  #3  
mytmouz
Senior Member
RACING JUNKIE
 
mytmouz's Avatar
 
Join Date: May 2006
Location: Pelahatchie, MS
Posts: 995
Default

It's in here somewhere...

http://www.msdignition.com/pdf/WireDiagrams/WDTN.PDF
mytmouz is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service